feat: add support for new wind.

README.md

@@ -23,6 +23,8 @@ Get devices from MSmartHome/Midea Meiju homes through the network and control th
 - T0x21 Central Air Conditioning Gateway
 - T0x26 Bath Heater
 - T0x3D Water Heater
+- T0x9B Steam oven
+- T0x9C Integrated Gas Stove
 - T0xA1 Dehumidifier
 - T0xAC Air Conditioner
 - T0xB2 Electric Steamer
@@ -30,20 +32,26 @@ Get devices from MSmartHome/Midea Meiju homes through the network and control th
 - T0xB6 Range Hood
 - T0xB7 Gas Stove
 - T0xB8 Smart Robot Vacuum
+- T0xBF Microwave Steam Oven
+- T0xC3 Heat Pump
 - T0xCA French Door Refrigerator
 - T0xCC Central Air Conditioning (Ducted) Wi-Fi Controller
+- T0xCD Air Energy Water Heater
 - T0xCE Fresh Air System
 - T0xCF Central Air Conditioning Heating
 - T0xD9 Twin Tub Washing Machine
-- T0xDB Front Load Washing Machine
+- T0xDA Impeller Washing Machine
+- T0xDB Cylinder Washing Machine
 - T0xDC Clothes Dryer
 - T0xE1 Dishwasher
 - T0xE2 Electric Water Heater
 - T0xE3 Constant Temperature Gas Water Heater
+- T0xE6 Wall hanging furnace
 - T0xEA Rice Cooker
 - T0xED Water Softener
 - T0xFA Electric Fan
 - T0xFB Electric Heater
+- T0xFC Air Purifier
 - T0xFD Humidifier
 
 Welcome to collaborate on adding support for more devices.
@@ -54,7 +62,7 @@ Collaboration method: After adding this plugin, find devices that are not correc
 
 Expand the `Attributes` card below and submit these fields with the issue. Pay special attention to the `Device type` and `Subtype` fields, as these are the basis for obtaining the corresponding lua files for device control.
 
-Then go to the Home Assistant installation directory, find the device's corresponding T_0000_`Device type`_`Subtype`_***.lua file in the `.storage/midea_auto_cloud/lua/` directory, and wait for adaptation.
+Then go to the Home Assistant installation directory, find the device's corresponding T_0000_`Device type`_`Subtype`_***.lua file in the `.storage/midea_auto_cloud/lua/` directory and `zip` file in the `.storage/midea_auto_cloud/plugin/` directory, and wait for adaptation.
 
 ![img_1.png](./img/img_1.png)
 

README_hans.md

@@ -23,6 +23,8 @@
 - T0x21 中央空调网关
 - T0x26 浴霸 
 - T0x3D 电热水瓶
+- T0x9B 蒸烤箱
+- T0x9C 集成灶
 - T0xA1 除湿机
 - T0xAC 空调
 - T0xB2 电蒸箱
@@ -30,20 +32,26 @@
 - T0xB6 抽油烟机
 - T0xB7 燃气灶
 - T0xB8 智能扫地机器人
+- T0xBF 微波炉
+- T0xC3 热泵
 - T0xCA 对开门冰箱
 - T0xCC 中央空调(风管机)Wi-Fi线控器
+- T0xCD 空气能热水器
 - T0xCE 新风机
 - T0xCF 中央空调暖家
 - T0xD9 复式洗衣机
+- T0xDA 波轮洗衣机
 - T0xDB 滚筒洗衣机
 - T0xDC 干衣机
 - T0xE1 洗碗机
 - T0xE2 电热水器
 - T0xE3 恒温式燃气热水器
+- T0xE6 壁挂炉
 - T0xEA 电饭锅
 - T0xED 软水机
 - T0xFA 电风扇
 - T0xFB 电暖器
+- T0xFC 空气净化器
 - T0xFD 加湿器
 
 欢迎合作开发添加更多设备支持。
@@ -54,7 +62,7 @@
 
 展开下面的`属性`卡片，把里面这些字段随issue提交。 着重关注Device type、Subtype这两个字段，这是后续获得设备控制对应lua文件的基础。
 
-再进入Homeassistant的安装目录， 在`.storage/midea_auto_cloud/lua/`目录下找到设备对应的T_0000_`Device type`_`Subtype`_***.lua文件，等待适配就可以了。
+再进入Homeassistant的安装目录， 在`.storage/midea_auto_cloud/lua/`目录下找到设备对应的T_0000_`Device type`_`Subtype`_***.lua文件，以及`.storage/midea_auto_cloud/plugin/`目录下的`zip`文件，等待适配就可以了。
 
 ![img_1.png](./img/img_1.png)
 

custom_components/midea_auto_cloud/__init__.py

@@ -1,5 +1,7 @@
+import asyncio
 import os
 import base64
+import traceback
 from importlib import import_module
 import re
 from homeassistant.config_entries import ConfigEntry
@@ -43,7 +45,7 @@ from .const import (
     CONF_SN,
     CONF_MODEL_NUMBER,
     CONF_SERVERS, STORAGE_PATH, CONF_MANUFACTURER_CODE,
-    CONF_SELECTED_HOMES
+    CONF_SELECTED_HOMES, CONF_SMART_PRODUCT_ID, STORAGE_PLUGIN_PATH
 )
 # 账号型：登录云端、获取设备列表，并为每台设备建立协调器（无本地控制）
 from .const import CONF_PASSWORD as CONF_PASSWORD_KEY, CONF_SERVER as CONF_SERVER_KEY
@@ -62,6 +64,9 @@ PLATFORMS: list[Platform] = [
     Platform.BUTTON
 ]
 
+async def import_module_async(module_name):
+    # 在线程池中执行导入操作
+    return await asyncio.to_thread(import_module, module_name, __package__)
 
 def get_sn8_used(hass: HomeAssistant, sn8):
     entries = hass.config_entries.async_entries(DOMAIN)
@@ -102,7 +107,7 @@ async def load_device_config(hass: HomeAssistant, device_type, sn8):
     # if not json_data:
     device_path = f".device_mapping.{'T0x%02X' % device_type}"
     try:
-        mapping_module = import_module(device_path, __package__)
+        mapping_module = await import_module_async(device_path)
         for key, config in mapping_module.DEVICE_MAPPING.items():
             # support tuple & regular expression pattern to support multiple sn8 sharing one mapping
             if (key == sn8) or (isinstance(key, tuple) and sn8 in key) or (isinstance(key, str) and re.match(key, sn8)):
@@ -140,11 +145,6 @@ async def update_listener(hass: HomeAssistant, config_entry: ConfigEntry):
 
 async def async_setup(hass: HomeAssistant, config: ConfigType):
     hass.data.setdefault(DOMAIN, {})
-
-    # 使用Home Assistant配置目录而不是当前工作目录
-    config_dir = hass.config.path(DOMAIN)
-    os.makedirs(config_dir, exist_ok=True)
-
     os.makedirs(hass.config.path(STORAGE_PATH), exist_ok=True)
     lua_path = hass.config.path(STORAGE_PATH)
 
@@ -250,6 +250,22 @@ async def async_setup_entry(hass: HomeAssistant, config_entry: ConfigEntry):
                             model_number=info.get(CONF_MODEL_NUMBER),
                             manufacturer_code=info.get(CONF_MANUFACTURER_CODE),
                         )
+                        try:
+                            os.makedirs(hass.config.path(STORAGE_PLUGIN_PATH), exist_ok=True)
+                            plugin_path = hass.config.path(STORAGE_PLUGIN_PATH)
+                            await cloud.download_plugin(
+                                path=plugin_path,
+                                appliance_code=appliance_code,
+                                smart_product_id=info.get(CONF_SMART_PRODUCT_ID),
+                                device_type=info.get(CONF_TYPE),
+                                sn=info.get(CONF_SN),
+                                sn8=info.get(CONF_SN8),
+                                model_number=info.get(CONF_MODEL_NUMBER),
+                                manufacturer_code=info.get(CONF_MANUFACTURER_CODE),
+                            )
+                        except Exception as e:
+                            traceback.print_exc()
+
                         try:
                             device = MiedaDevice(
                                 name=info.get(CONF_NAME),
@@ -263,6 +279,7 @@ async def async_setup_entry(hass: HomeAssistant, config_entry: ConfigEntry):
                                 protocol=info.get(CONF_PROTOCOL) or 2,
                                 model=info.get(CONF_MODEL),
                                 subtype=info.get(CONF_MODEL_NUMBER),
+                                manufacturer_code=info.get(CONF_MANUFACTURER_CODE),
                                 sn=info.get(CONF_SN),
                                 sn8=info.get(CONF_SN8),
                                 lua_file=file,

custom_components/midea_auto_cloud/climate.py

@@ -85,6 +85,7 @@ class MideaClimateEntity(MideaEntity, ClimateEntity):
         self._key_target_humidity = self._config.get("target_humidity")
         self._attr_temperature_unit = self._config.get("temperature_unit")
         self._attr_precision = self._config.get("precision")
+        self._attr_target_temperature_step = self._config.get("precision")
 
     @property
     def supported_features(self):
@@ -107,13 +108,23 @@ class MideaClimateEntity(MideaEntity, ClimateEntity):
 
     @property
     def current_temperature(self):
-        temp = self._get_nested_value(self._key_current_temperature)
-        if temp is not None:
-            try:
-                return float(temp)
-            except (ValueError, TypeError):
-                return None
-        return None
+        if isinstance(self._key_current_temperature, list):
+            temp_int = self._get_nested_value(self._key_current_temperature[0])
+            tem_dec = self._get_nested_value(self._key_current_temperature[1])
+            if temp_int is not None and tem_dec is not None:
+                try:
+                    return float(temp_int) + float(tem_dec)
+                except (ValueError, TypeError):
+                    return None
+            return None
+        else:
+            temp = self._get_nested_value(self._key_current_temperature)
+            if temp is not None:
+                try:
+                    return float(temp)
+                except (ValueError, TypeError):
+                    return None
+            return None
 
     @property
     def target_temperature(self):

custom_components/midea_auto_cloud/core/cloud.py

@@ -3,7 +3,9 @@ import time
 import datetime
 import json
 import base64
-import asyncio
+import traceback
+import os
+import aiofiles
 import requests
 from aiohttp import ClientSession
 from secrets import token_hex
@@ -27,7 +29,8 @@ clouds = {
         "app_key": "ac21b9f9cbfe4ca5a88562ef25e2b768",
         "iot_key": bytes.fromhex(format(7882822598523843940, 'x')).decode(),
         "hmac_key": bytes.fromhex(format(117390035944627627450677220413733956185864939010425, 'x')).decode(),
-        "api_url": "https://mp-prod.appsmb.com/mas/v5/app/proxy?alias=",
+        "api_url": "https://mp-eu-prod.appsmb.com/mas/v5/app/proxy?alias=",
+        # "api_url": "https://mp-prod.appsmb.com/mas/v5/app/proxy?alias=",
     },
 }
 
@@ -88,15 +91,14 @@ class MideaCloud:
                 "accesstoken": self._access_token
             })
         response:dict = {"code": -1}
-        _LOGGER.debug(f"Midea cloud API header: {header}")
-        _LOGGER.debug(f"Midea cloud API dump_data: {dump_data}")
+        _LOGGER.debug(f"Midea cloud API url: {url}, header: {header}, data: {data}")
         try:
-            r = await self._session.request(method, url, headers=header, data=dump_data, timeout=5)
+            r = await self._session.request(method, url, headers=header, data=dump_data, timeout=30)
             raw = await r.read()
-            _LOGGER.debug(f"Midea cloud API url: {url}, data: {data}, response: {raw}")
+            _LOGGER.debug(f"Midea cloud API url: {url}, header: {header}, data: {data}, response: {raw}")
             response = json.loads(raw)
         except Exception as e:
-            _LOGGER.debug(f"API request attempt failed: {e}")
+            traceback.print_exc()
 
         if int(response["code"]) == 0:
             if "data" in response:
@@ -139,7 +141,7 @@ class MideaCloud:
             _LOGGER.debug(f"Midea cloud API url: {url}, data: {data}, response: {raw}")
             response = json.loads(raw)
         except Exception as e:
-            _LOGGER.debug(f"API request attempt failed: {e}")
+            traceback.print_exc()
 
         if int(response["code"]) == 0 and "data" in response:
             return response["data"]
@@ -161,28 +163,6 @@ class MideaCloud:
     async def login(self) -> bool:
         raise NotImplementedError()
 
-    async def send_cloud(self, appliance_id: int, data: bytearray):
-        appliance_code = str(appliance_id)
-        params = {
-            'applianceCode': appliance_code,
-            'order': self._security.aes_encrypt(bytes_to_dec_string(data)).hex(),
-            'timestamp': 'true',
-            "isFull": "false"
-        }
-
-        if response := await self._api_request(
-            endpoint='/v1/appliance/transparent/send',
-            data=params,
-        ):
-            if response and response.get('reply'):
-                _LOGGER.debug("[%s] Cloud command response: %s", appliance_code, response)
-                reply_data = self._security.aes_decrypt(bytes.fromhex(response['reply']))
-                return reply_data
-            else:
-                _LOGGER.warning("[%s] Cloud command failed: %s", appliance_code, response)
-
-        return None
-
     async def list_home(self) -> dict | None:
         return {1: "My home"}
 
@@ -198,10 +178,18 @@ class MideaCloud:
     ):
         raise NotImplementedError()
 
-    async def send_device_control(self, appliance_code: int, control: dict, status: dict | None = None) -> bool:
-        """Send control to a device via cloud. Subclasses should implement if supported."""
+    async def download_plugin(
+            self, path: str,
+            appliance_code: str,
+            smart_product_id: str,
+            device_type: int,
+            sn: str,
+            sn8: str,
+            model_number: str | None,
+            manufacturer_code: str = "0000",
+    ):
         raise NotImplementedError()
-    
+
     async def send_central_ac_control(self, appliance_code: int, nodeid: str, modelid: str, idtype: int, control: dict) -> bool:
         """Send control to central AC subdevice. Subclasses should implement if supported."""
         raise NotImplementedError()
@@ -309,6 +297,7 @@ class MeijuCloud(MideaCloud):
                             "type": int(appliance.get("type"), 16),
                             "sn": self._security.aes_decrypt(appliance.get("sn")) if appliance.get("sn") else "",
                             "sn8": appliance.get("sn8", "00000000"),
+                            "smart_product_id": appliance.get("smartProductId", "0"),
                             "model_number": appliance.get("modelNumber", "0"),
                             "manufacturer_code": appliance.get("enterpriseCode", "0000"),
                             "model": appliance.get("productModel"),
@@ -322,6 +311,28 @@ class MeijuCloud(MideaCloud):
             return appliances
         return None
 
+    async def send_cloud(self, appliance_id: int, data: bytearray):
+        appliance_code = str(appliance_id)
+        params = {
+            'applianceCode': appliance_code,
+            'order': self._security.aes_encrypt(bytes_to_dec_string(data)).hex(),
+            'timestamp': 'true',
+            "isFull": "false"
+        }
+
+        if response := await self._api_request(
+            endpoint='/v1/appliance/transparent/send',
+            data=params,
+        ):
+            if response and response.get('reply'):
+                _LOGGER.debug("[%s] Cloud command response: %s", appliance_code, response)
+                reply_data = self._security.aes_decrypt(bytes.fromhex(response['reply']))
+                return reply_data
+            else:
+                _LOGGER.warning("[%s] Cloud command failed: %s", appliance_code, response)
+
+        return None
+
     async def get_device_status(self, appliance_code: int, query: dict) -> dict | None:
         data = {
             "applianceCode": str(appliance_code),
@@ -361,11 +372,8 @@ class MeijuCloud(MideaCloud):
         command_data = {
             "nodeid": nodeid,
             "acattri_ctrl": {
-                "aclist": [{
-                    "nodeid": nodeid,
-                    "modelid": modelid,
-                    "type": idtype
-                }],
+                "nodeid": nodeid,
+                "modelid": modelid, "type": idtype, "aclist_data": nodeid[-2:],
                 "event": control
             }
         }
@@ -473,11 +481,98 @@ class MeijuCloud(MideaCloud):
                               self._security.aes_decrypt_with_fixed_key(lua))
                     stream = stream.replace("\r\n", "\n")
                     fnm = f"{path}/{response['fileName']}"
-                    with open(fnm, "w") as fp:
-                        fp.write(stream)
+                    async with aiofiles.open(fnm, "w") as fp:
+                        await fp.write(stream)
         return fnm
 
 
+    async def download_plugin(
+            self, path: str,
+            appliance_code: str,
+            smart_product_id: str,
+            device_type: int,
+            sn: str,
+            sn8: str,
+            model_number: str | None,
+            manufacturer_code: str = "0000",
+    ):
+        # 构建 applianceList，根据传入的参数动态生成
+        appliance_info = {
+            "appModel": sn8,
+            "appEnterprise": manufacturer_code,
+            "appType": f"0x{device_type:02X}",
+            "applianceCode": str(appliance_code) if isinstance(appliance_code, int) else appliance_code,
+            "smartProductId": str(smart_product_id) if isinstance(smart_product_id, int) else smart_product_id,
+            "modelNumber": model_number or "0",
+            "versionCode": 0
+        }
+        appliance_list = [appliance_info]
+        data = {
+            "applianceList": json.dumps(appliance_list),
+            "iotAppId": self.APP_ID,
+            "match": "1",
+            "clientType": "1",
+            "clientVersion": 201
+        }
+        fnm = None
+        if response := await self._api_request(
+            endpoint="/v1/plugin/update/getPluginV3",
+            data=data
+        ):
+            # response 是 {"list": [...]}
+            plugin_list = response.get("list", [])
+            if not plugin_list:
+                MideaLogger.warning(f"No plugin found for device type 0x{device_type:02X}, sn: {sn}")
+                return None
+            
+            # 找到匹配的设备（优先匹配 applianceCode，其次匹配 appType）
+            matched_plugin = None
+            # 首先尝试精确匹配 applianceCode
+            for plugin in plugin_list:
+                if plugin.get("applianceCode") == sn and plugin.get("appType") == f"0x{device_type:02X}":
+                    matched_plugin = plugin
+                    break
+            
+            # 如果没有精确匹配，使用第一个匹配 appType 的
+            if not matched_plugin:
+                for plugin in plugin_list:
+                    if plugin.get("appType") == f"0x{device_type:02X}":
+                        matched_plugin = plugin
+                        break
+            
+            if not matched_plugin:
+                MideaLogger.warning(f"No matching plugin found for device type 0x{device_type:02X}, sn: {sn}")
+                return None
+            
+            # 下载 zip 文件
+            zip_url = matched_plugin.get("url")
+            zip_title = matched_plugin.get("title", f"plugin_0x{device_type:02X}.zip")
+            
+            if not zip_url:
+                MideaLogger.warning(f"No download URL found for plugin: {zip_title}")
+                return None
+            
+            try:
+                # 确保目录存在
+                os.makedirs(path, exist_ok=True)
+                
+                res = await self._session.get(zip_url)
+                if res.status == 200:
+                    zip_data = await res.read()
+                    if zip_data:
+                        fnm = f"{path}/{zip_title}"
+                        async with aiofiles.open(fnm, "wb") as fp:
+                            await fp.write(zip_data)
+                        MideaLogger.info(f"Downloaded plugin file: {fnm}")
+                    else:
+                        MideaLogger.warning(f"Downloaded zip file is empty: {zip_url}")
+                else:
+                    MideaLogger.warning(f"Failed to download plugin, status: {res.status}, url: {zip_url}")
+            except Exception as e:
+                MideaLogger.error(f"Error downloading plugin: {e}")
+                traceback.print_exc()
+        return fnm
+
 class MSmartHomeCloud(MideaCloud):
     APP_ID = "1010"
     SRC = "10"
@@ -547,7 +642,7 @@ class MSmartHomeCloud(MideaCloud):
                 self._api_url = api_url
 
     async def login(self) -> bool:
-        await self._re_route()
+        # await self._re_route()
         if login_id := await self._get_login_id():
             self._login_id = login_id
             iot_data = self._make_general_data()
@@ -635,10 +730,105 @@ class MSmartHomeCloud(MideaCloud):
                               self._security.aes_decrypt_with_fixed_key(lua))
                     stream = stream.replace("\r\n", "\n")
                     fnm = f"{path}/{response['fileName']}"
-                    with open(fnm, "w") as fp:
-                        fp.write(stream)
+                    async with aiofiles.open(fnm, "w") as fp:
+                        await fp.write(stream)
         return fnm
 
+    async def send_cloud(self, appliance_code: int, data: bytearray):
+        appliance_code = str(appliance_code)
+        params = {
+            "clientType": "1",
+            "appId": self.APP_ID,
+            "format": "2",
+            "deviceId": self._device_id,
+            "applianceCode": appliance_code,
+            'order': self._security.aes_encrypt(bytes_to_dec_string(data)).hex(),
+            'timestamp': 'true',
+            "isFull": "false"
+        }
+
+        if response := await self._api_request(
+            endpoint='/v1/appliance/transparent/send',
+            data=params,
+        ):
+            if response and response.get('reply'):
+                _LOGGER.debug("[%s] Cloud command response: %s", appliance_code, response)
+                reply_data = self._security.aes_decrypt(bytes.fromhex(response['reply']))
+                return reply_data
+            else:
+                _LOGGER.warning("[%s] Cloud command failed: %s", appliance_code, response)
+
+        return None
+
+    async def get_device_status(
+        self,
+        appliance_code: int,
+        device_type: int,
+        sn: str,
+        model_number: str | None,
+        manufacturer_code: str = "0000",
+        query: dict = {}
+    ) -> dict | None:
+        data = {
+            "clientType": "1",
+            "appId": self.APP_ID,
+            "format": "2",
+            "deviceId": self._device_id,
+            "iotAppId": self.APP_ID,
+            "applianceMFCode": manufacturer_code,
+            "applianceType": "0x%02X" % device_type,
+            "modelNumber": model_number,
+            "applianceSn": self._security.aes_encrypt_with_fixed_key(sn.encode("ascii")).hex(),
+            "version": "0",
+            "encryptedType ": "2",
+            "applianceCode": appliance_code,
+            "command": {
+                "query": query
+            }
+        }
+        if response := await self._api_request(
+            endpoint="/v1/device/status/lua/get",
+            data=data
+        ):
+            # 预期返回形如 { ... 状态键 ... }
+            return response
+        return None
+
+    async def send_device_control(
+        self,
+        appliance_code: int,
+        device_type: int,
+        sn: str,
+        model_number: str | None,
+        manufacturer_code: str = "0000",
+        control: dict | None = None,
+        status: dict | None = None
+    ) -> bool:
+        data = {
+            "clientType": "1",
+            "appId": self.APP_ID,
+            "format": "2",
+            "deviceId": self._device_id,
+            "iotAppId": self.APP_ID,
+            "applianceMFCode": manufacturer_code,
+            "applianceType": "0x%02X" % device_type,
+            "modelNumber": model_number,
+            "applianceSn": self._security.aes_encrypt_with_fixed_key(sn.encode("ascii")).hex(),
+            "version": "0",
+            "encryptedType ": "2",
+            "applianceCode": appliance_code,
+            "command": {
+                "control": control
+            }
+        }
+        if status and isinstance(status, dict):
+            data["command"]["status"] = status
+        response = await self._api_request(
+            endpoint="/v1/device/lua/control",
+            data=data
+        )
+        return response is not None
+
 
 def get_midea_cloud(cloud_name: str, session: ClientSession, account: str, password: str) -> MideaCloud | None:
     cloud = None

custom_components/midea_auto_cloud/core/device.py

@@ -3,7 +3,7 @@ import socket
 import traceback
 from enum import IntEnum
 
-from .cloud import MideaCloud
+from .cloud import MideaCloud, MSmartHomeCloud, MeijuCloud
 from .security import LocalSecurity, MSGTYPE_HANDSHAKE_REQUEST, MSGTYPE_ENCRYPTED_REQUEST
 from .packet_builder import PacketBuilder
 from .message import MessageQuestCustom
@@ -42,6 +42,7 @@ class MiedaDevice(threading.Thread):
                  protocol: int,
                  model: str | None,
                  subtype: int | None,
+                 manufacturer_code: str | None,
                  connected: bool,
                  sn: str | None,
                  sn8: str | None,
@@ -65,6 +66,7 @@ class MiedaDevice(threading.Thread):
         self._subtype = subtype
         self._sn = sn
         self._sn8 = sn8
+        self._manufacturer_code = manufacturer_code
         self._attributes = {
             "device_type": "T0x%02X" % device_type,
             "sn": sn,
@@ -178,7 +180,17 @@ class MiedaDevice(threading.Thread):
 
             cloud = self._cloud
             if cloud and hasattr(cloud, "send_device_control"):
-                await cloud.send_device_control(self._device_id, control=nested_status, status=self._attributes)
+                if isinstance(cloud, MSmartHomeCloud):
+                    await cloud.send_device_control(
+                        appliance_code=self._device_id,
+                        device_type=self.device_type,
+                        sn=self.sn,
+                        model_number=self.subtype,
+                        manufacturer_code=self._manufacturer_code,
+                        control=nested_status,
+                        status=self._attributes)
+                elif isinstance(cloud, MeijuCloud):
+                    await cloud.send_device_control(self._device_id, control=nested_status, status=self._attributes)
 
     async def set_attributes(self, attributes):
         new_status = {}
@@ -205,7 +217,17 @@ class MiedaDevice(threading.Thread):
 
             cloud = self._cloud
             if cloud and hasattr(cloud, "send_device_control"):
-                await cloud.send_device_control(self._device_id, control=nested_status, status=self._attributes)
+                if isinstance(cloud, MSmartHomeCloud):
+                    await cloud.send_device_control(
+                        appliance_code=self._device_id,
+                        device_type=self.device_type,
+                        sn=self.sn,
+                        model_number=self.subtype,
+                        manufacturer_code=self._manufacturer_code,
+                        control=nested_status,
+                        status=self._attributes)
+                elif isinstance(cloud, MeijuCloud):
+                    await cloud.send_device_control(self._device_id, control=nested_status, status=self._attributes)
 
     def set_ip_address(self, ip_address):
         MideaLogger.debug(f"Update IP address to {ip_address}")
@@ -269,47 +291,72 @@ class MiedaDevice(threading.Thread):
 
     async def refresh_status(self):
         for query in self._queries:
-            if self._lua_runtime is not None:
-                if query_cmd := self._lua_runtime.build_query(query):
-                    await self._build_send(query_cmd)
+            cloud = self._cloud
+            if cloud and hasattr(cloud, "get_device_status"):
+                if isinstance(cloud, MSmartHomeCloud):
+                    if status := await cloud.get_device_status(
+                        appliance_code=self._device_id,
+                        device_type=self.device_type,
+                        sn=self.sn,
+                        model_number=self.subtype,
+                        manufacturer_code=self._manufacturer_code,
+                        query=query
+                    ):
+                        self._parse_cloud_message(status)
+                    else:
+                        if self._lua_runtime is not None:
+                            if query_cmd := self._lua_runtime.build_query(query):
+                                await self._build_send(query_cmd)
 
-    def _parse_cloud_message(self, decrypted):
+                elif isinstance(cloud, MeijuCloud):
+                    if status := await cloud.get_device_status(
+                        appliance_code=self._device_id,
+                        query=query
+                    ):
+                        self._parse_cloud_message(status)
+                    else:
+                        if self._lua_runtime is not None:
+                            if query_cmd := self._lua_runtime.build_query(query):
+                                await self._build_send(query_cmd)
+
+
+    def _parse_cloud_message(self, status):
         # MideaLogger.debug(f"Received: {decrypted}")
-        if status := self._lua_runtime.decode_status(dec_string_to_bytes(decrypted).hex()):
-            MideaLogger.debug(f"Decoded: {status}")
-            new_status = {}
-            for single in status.keys():
-                value = status.get(single)
-                if single not in self._attributes or self._attributes[single] != value:
-                    self._attributes[single] = value
-                    new_status[single] = value
-            if len(new_status) > 0:
-                for c in self._calculate_get:
-                    lvalue = c.get("lvalue")
-                    rvalue = c.get("rvalue")
-                    if lvalue and rvalue:
-                        calculate = False
-                        for s, v in new_status.items():
-                            if rvalue.find(f"[{s}]") >= 0:
-                                calculate = True
-                                break
-                        if calculate:
-                            calculate_str1 = \
-                                (f"{lvalue.replace('[', 'self._attributes[')} = "
-                                 f"{rvalue.replace('[', 'self._attributes[')}") \
-                                    .replace("[", "[\"").replace("]", "\"]")
-                            calculate_str2 = \
-                                (f"{lvalue.replace('[', 'new_status[')} = "
-                                 f"{rvalue.replace('[', 'self._attributes[')}") \
-                                    .replace("[", "[\"").replace("]", "\"]")
-                            try:
-                                exec(calculate_str1)
-                                exec(calculate_str2)
-                            except Exception:
-                                MideaLogger.warning(
-                                    f"Calculation Error: {lvalue} = {rvalue}", self._device_id
-                                )
-                self._update_all(new_status)
+        new_status = {}
+        for single in status.keys():
+            value = status.get(single)
+            if single not in self._attributes or self._attributes[single] != value:
+                self._attributes[single] = value
+                new_status[single] = value
+        if len(new_status) > 0:
+            for c in self._calculate_get:
+                lvalue = c.get("lvalue")
+                rvalue = c.get("rvalue")
+                if lvalue and rvalue:
+                    calculate = False
+                    for s, v in new_status.items():
+                        if rvalue.find(f"[{s}]") >= 0:
+                            calculate = True
+                            break
+                    if calculate:
+                        calculate_str1 = \
+                            (f"{lvalue.replace('[', 'self._attributes[').replace("]", "\"]")} = "
+                             f"{rvalue.replace('[', 'self._attributes[').replace(']', "\"]")}") \
+                                .replace("[", "[\"")
+                        calculate_str2 = \
+                            (f"{lvalue.replace('[', 'new_status[').replace("]", "\"]")} = "
+                             f"{rvalue.replace('[', 'self._attributes[').replace(']', "\"]")}") \
+                                .replace("[", "[\"")
+                        try:
+                            exec(calculate_str1)
+                            exec(calculate_str2)
+                        except Exception as e:
+                            traceback.print_exc()
+                            MideaLogger.warning(
+                                f"Calculation Error: {lvalue} = {rvalue}, calculate_str1: {calculate_str1}, calculate_str2: {calculate_str2}",
+                                self._device_id
+                            )
+            self._update_all(new_status)
         return ParseMessageResult.SUCCESS
 
     def _parse_message(self, msg):
@@ -371,11 +418,13 @@ class MiedaDevice(threading.Thread):
 
     async def _send_message(self, data):
         if reply := await self._cloud.send_cloud(self._device_id, data):
-            result = self._parse_cloud_message(reply)
-            if result == ParseMessageResult.ERROR:
-                MideaLogger.debug(f"Message 'ERROR' received")
-            elif result == ParseMessageResult.SUCCESS:
-                timeout_counter = 0
+            if reply_dec := self._lua_runtime.decode_status(dec_string_to_bytes(reply).hex()):
+                MideaLogger.debug(f"Decoded: {reply_dec}")
+                result = self._parse_cloud_message(reply_dec)
+                if result == ParseMessageResult.ERROR:
+                    MideaLogger.debug(f"Message 'ERROR' received")
+                elif result == ParseMessageResult.SUCCESS:
+                    timeout_counter = 0
 
     # if self._protocol == 3:
     #     self._send_message_v3(data, msg_type=MSGTYPE_ENCRYPTED_REQUEST)

custom_components/midea_auto_cloud/core/logger.py

@@ -7,6 +7,7 @@ class MideaLogType(IntEnum):
     DEBUG = 1
     WARN = 2
     ERROR = 3
+    INFO = 4
 
 
 class MideaLogger:
@@ -18,6 +19,8 @@ class MideaLogger:
             log = f"[{device_id}] {log}"
         if log_type == MideaLogType.DEBUG:
             logging.getLogger(mod.__name__).debug(log)
+        elif log_type == MideaLogType.INFO:
+            logging.getLogger(mod.__name__).info(log)
         elif log_type == MideaLogType.WARN:
             logging.getLogger(mod.__name__).warning(log)
         elif log_type == MideaLogType.ERROR:
@@ -27,6 +30,10 @@ class MideaLogger:
     def debug(log, device_id=None):
         MideaLogger._log(MideaLogType.DEBUG, log, device_id)
 
+    @staticmethod
+    def info(log, device_id=None):
+        MideaLogger._log(MideaLogType.INFO, log, device_id)
+
     @staticmethod
     def warning(log, device_id=None):
         MideaLogger._log(MideaLogType.WARN, log, device_id)

custom_components/midea_auto_cloud/core/lua_runtime.py

@@ -87,6 +87,17 @@ class MideaCodec(LuaRuntime):
                 query_dict["control"]["bucket"] = prefix
             else:
                 query_dict["control"]["bucket"] = "db"
+        # 针对T0x9C集成灶特殊处理
+        elif self._device_type == "T0x9C":
+            control_keys = list(append.keys())
+            if len(control_keys) > 0:
+                # 从第一个键名中提取前缀，例如从 'db_power' 中提取 'db'
+                first_key = control_keys[0]
+                prefix = first_key.split("_")[0]
+            else:
+                prefix = "total"
+
+            query_dict["control"]["type"] = prefix
         json_str = json.dumps(query_dict)
         MideaLogger.debug(f"LuaRuntime json_str {json_str}")
         try:

custom_components/midea_auto_cloud/data_coordinator.py

@@ -1,9 +1,11 @@
 """Data coordinator for Midea Auto Cloud integration."""
 
 import logging
+import traceback
 from datetime import datetime, timedelta
 from typing import NamedTuple
 
+from attr import attributes
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import CALLBACK_TYPE, HomeAssistant, callback
 from homeassistant.helpers.event import async_call_later
@@ -184,14 +186,35 @@ class MideaDataUpdateCoordinator(DataUpdateCoordinator[MideaDeviceData]):
 
     async def async_set_attribute(self, attribute: str, value) -> None:
         """Set a device attribute."""
-        # 云端控制：构造 control 与 status（携带当前状态作为上下文）
-        await self.device.set_attribute(attribute, value)
-        self.device.attributes[attribute] = value
-        self.mute_state_update_for_a_while()
-        self.async_update_listeners()
+        attributes = {}
+        attributes[attribute] = value
+        await self.async_set_attributes(attributes)
 
     async def async_set_attributes(self, attributes: dict) -> None:
         """Set multiple device attributes."""
+        # 云端控制：构造 control 与 status（携带当前状态作为上下文）
+        for c in self.device._calculate_set:
+            lvalue = c.get("lvalue")
+            rvalue = c.get("rvalue")
+            if lvalue and rvalue:
+                calculate = False
+                for s, v in attributes.items():
+                    if rvalue.find(f"[{s}]") >= 0:
+                        calculate = True
+                        break
+                if calculate:
+                    calculate_str1 = \
+                        (f"{lvalue.replace('[', 'attributes[').replace("]", "\"]")} = "
+                         f"{rvalue.replace('[', 'attributes[').replace(']', "\"]")}") \
+                            .replace("[", "[\"")
+                    try:
+                        exec(calculate_str1)
+                    except Exception as e:
+                        traceback.print_exc()
+                        MideaLogger.warning(
+                            f"Calculation Error: {lvalue} = {rvalue}, calculate_str1: {calculate_str1}",
+                            self._device_id
+                        )
         await self.device.set_attributes(attributes)
         self.device.attributes.update(attributes)
         self.mute_state_update_for_a_while()

custom_components/midea_auto_cloud/device_mapping/T0x13.py

@@ -1,4 +1,5 @@
-from homeassistant.const import Platform
+from homeassistant.components.fan import DIRECTION_FORWARD, DIRECTION_REVERSE
+from homeassistant.const import Platform, UnitOfTemperature, PRECISION_WHOLE
 
 DEVICE_MAPPING = {
     "default": {
@@ -45,14 +46,7 @@ DEVICE_MAPPING = {
             Platform.FAN: {
                 "fan": {
                     "power": "fan_power",
-                    "speeds": [
-                        {"fan_speed": "1"},
-                        {"fan_speed": "2"},
-                        {"fan_speed": "3"},
-                        {"fan_speed": "4"},
-                        {"fan_speed": "5"},
-                        {"fan_speed": "6"},
-                    ],
+                    "speeds": list({"fan_speed": value + 1} for value in range(0, 6)),
                     "preset_modes": {
                         "breathing_wind": {"fan_scene": "breathing_wind"},
                         "const_temperature": {"fan_scene": "const_temperature"},
@@ -64,5 +58,73 @@ DEVICE_MAPPING = {
                 }
             }
         }
+    },
+    "79010863": {
+        "rationale": ["off", "on"],
+        "queries": [{}],
+        "centralized": [],
+        "calculate": {
+            "get": [
+                {
+                    "lvalue": "[device_fan_speed]",
+                    "rvalue": "int((int([fan_speed])) / 20) + 1"
+                },
+            ],
+            "set": [
+                {
+                    "lvalue": "[fan_speed]",
+                    "rvalue": "min(int((int([device_fan_speed]) - 1) * 20 + 1), 100)"
+                },
+            ]
+        },
+        "entities": {
+            Platform.LIGHT: {
+                "light": {
+                    "power": "led_power",
+                    "brightness": {"brightness": [1, 100]},
+                    "color_temp": {"color_temperature": [2700, 6500]},
+                    "preset_modes": {
+                        "work": {"led_scene_light": "work"},
+                        "eating": {"led_scene_light": "eating"},
+                        "film": {"led_scene_light": "film"},
+                        "night": {"led_scene_light": "night"},
+                        "ledmanual": {"led_scene_light": "ledmanual"},
+                    }
+                }
+            },
+            Platform.FAN: {
+                "fan": {
+                    "power": "fan_power",
+                    "speeds": list({"device_fan_speed": value + 1} for value in range(0, 6)),
+                    "preset_modes": {
+                        "breathing_wind": {"fan_scene": "breathing_wind"},
+                        "const_temperature": {"fan_scene": "const_temperature"},
+                        "fanmanual": {"fan_scene": "fanmanual"},
+                        "baby_wind": {"fan_scene": "baby_wind"},
+                        "sleep_wind": {"fan_scene": "sleep_wind"},
+                        "forest_wind": {"fan_scene": "forest_wind"}
+                    },
+                    "directions": {
+                        DIRECTION_FORWARD: {"arround_dir": "1"},
+                        DIRECTION_REVERSE: {"arround_dir": "0"},
+                    }
+                }
+            },
+            Platform.CLIMATE: {
+                 "thermostat": {
+                    "power": "fan_power",
+                    "hvac_modes": {
+                        "off": {"fan_scene": "fanmanual"},
+                        "auto": {"fan_scene": "const_temperature"},
+                    },
+                    "target_temperature": "const_temperature_value",
+                    "current_temperature": "indoor_temperature",
+                    "min_temp": 20,
+                    "max_temp": 35,
+                    "temperature_unit": UnitOfTemperature.CELSIUS,
+                    "precision": PRECISION_WHOLE,
+                }
+            }
+        }
     }
 }

custom_components/midea_auto_cloud/device_mapping/T0x9B.py

@@ -0,0 +1,20 @@
+from homeassistant.const import Platform, UnitOfTemperature, UnitOfVolume, UnitOfTime, PERCENTAGE, PRECISION_HALVES, \
+    UnitOfEnergy, UnitOfPower, PRECISION_WHOLE, UnitOfPressure
+from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
+from homeassistant.components.binary_sensor import BinarySensorDeviceClass
+from homeassistant.components.switch import SwitchDeviceClass
+
+DEVICE_MAPPING = {
+    "default": {
+        "rationale": ["off", "on"],
+        "queries": [{}],
+        "centralized": [],
+        "entities": {
+            Platform.SENSOR: {
+                "work_status": {
+                    "device_class": SensorDeviceClass.ENUM,
+                }
+            }
+        }
+    }
+}

custom_components/midea_auto_cloud/device_mapping/T0x9C.py

@@ -0,0 +1,116 @@
+from homeassistant.const import Platform, UnitOfTemperature, UnitOfVolume, UnitOfTime, PERCENTAGE, PRECISION_HALVES, \
+    UnitOfEnergy, UnitOfPower, PRECISION_WHOLE, UnitOfPressure
+from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
+from homeassistant.components.binary_sensor import BinarySensorDeviceClass
+from homeassistant.components.switch import SwitchDeviceClass
+
+DEVICE_MAPPING = {
+    "default": {
+        "rationale": ["off", "on"],
+        "queries": [{}],
+        "centralized": [],
+        "entities": {
+            Platform.NUMBER: {
+                "b6_lightness": {
+                    "min": 0,
+                    "max": 100,
+                    "step": 1
+                }
+            },
+            Platform.SWITCH: {
+                "total_power": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "translation_key": "power"
+                },
+                "total_lock": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "translation_key": "lock"
+                },
+                "b6_light": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+            },
+            Platform.SELECT: {
+                "b3_function_control":{
+                    "options": {
+                        "关闭": {"b3_work_cabinet_control": 1, "b3_function_control": 1},
+                        "消毒": {"b3_work_cabinet_control": 1, "b3_function_control": 2, "b3_work_destination_time": 60},
+                        "烘干": {"b3_work_cabinet_control": 1, "b3_function_control": 4, "b3_work_destination_time": 120},
+                    }
+                },
+                "b6_gear": {
+                    "options": {
+                        "关": {"b6_gear": "0"},
+                        "低": {"b6_gear": "1"},
+                        "中": {"b6_gear": "2"},
+                        "高": {"b6_gear": "3"},
+                        "爆炒": {"b6_gear": "4"}
+                    }
+                },
+                "b6_power_on_light": {
+                    "options": {
+                        "关": {"b6_power_on_light": "off", "b6_setting": "power_on_light"},
+                        "开": {"b6_power_on_light": "on", "b6_setting": "power_on_light"}
+                    }
+                },
+                "b6_lock": {
+                    "options": {
+                        "关": {"b6_lock": "off", "b6_setting": "lock"},
+                        "开": {"b6_lock": "on", "b6_setting": "lock"}
+                    }
+                },
+                "b6_smoke_stove_linkage_gear": {
+                    "options": {
+                        "1档": {"b6_smoke_stove_linkage_gear": 1, "b6_setting": "smoke_stove_linkage"},
+                        "2档": {"b6_smoke_stove_linkage_gear": 2, "b6_setting": "smoke_stove_linkage"},
+                        "3档": {"b6_smoke_stove_linkage_gear": 3, "b6_setting": "smoke_stove_linkage"},
+                    }
+                },
+                "b6_delay_gear_linkage_gear": {
+                    "options": {
+                        "1档": {"b6_delay_gear_linkage_gear": 1, "b6_setting": "delay_gear_linkage"},
+                        "2档": {"b6_delay_gear_linkage_gear": 2, "b6_setting": "delay_gear_linkage"},
+                        "3档": {"b6_delay_gear_linkage_gear": 3, "b6_setting": "delay_gear_linkage"},
+                    }
+                },
+                "b6_delay_time_value": {
+                    "options": {
+                        "关": {"b6_delay_time": "off", "b6_setting": "delay_time"},
+                        "1分钟": {"b6_delay_time": "on", "b6_delay_time_value": 1, "b6_setting": "delay_time"},
+                        "2分钟": {"b6_delay_time": "on", "b6_delay_time_value": 2, "b6_setting": "delay_time"},
+                        "3分钟": {"b6_delay_time": "on", "b6_delay_time_value": 3, "b6_setting": "delay_time"},
+                        "4分钟": {"b6_delay_time": "on", "b6_delay_time_value": 4, "b6_setting": "delay_time"},
+                        "5分钟": {"b6_delay_time": "on", "b6_delay_time_value": 5, "b6_setting": "delay_time"},
+                        "6分钟": {"b6_delay_time": "on", "b6_delay_time_value": 6, "b6_setting": "delay_time"},
+                        "7分钟": {"b6_delay_time": "on", "b6_delay_time_value": 7, "b6_setting": "delay_time"},
+                        "8分钟": {"b6_delay_time": "on", "b6_delay_time_value": 8, "b6_setting": "delay_time"},
+                        "9分钟": {"b6_delay_time": "on", "b6_delay_time_value": 9, "b6_setting": "delay_time"},
+                        "10分钟": {"b6_delay_time": "on", "b6_delay_time_value": 10, "b6_setting": "delay_time"},
+                    }
+                }
+            },
+            Platform.SENSOR: {
+                "b3_upstair_status": {
+                    "device_class": SensorDeviceClass.ENUM,
+                },
+                "b6_wind_pressure": {
+                    "device_class": SensorDeviceClass.PRESSURE,
+                    "unit_of_measurement": UnitOfPressure.PA,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "b7_left_status": {
+                    "device_class": SensorDeviceClass.ENUM,
+                },
+                "b7_left_gear": {
+                    "device_class": SensorDeviceClass.ENUM,
+                },
+                "b7_right_status": {
+                    "device_class": SensorDeviceClass.ENUM,
+                },
+                "b7_right_gear": {
+                    "device_class": SensorDeviceClass.ENUM,
+                }
+            }
+        }
+    }
+}

custom_components/midea_auto_cloud/device_mapping/T0xAC.py

@@ -1,4 +1,5 @@
-from homeassistant.const import Platform, UnitOfTemperature, PRECISION_HALVES, PRECISION_WHOLE
+from homeassistant.const import Platform, UnitOfTemperature, PRECISION_HALVES, PRECISION_WHOLE, \
+    CONCENTRATION_PARTS_PER_MILLION, CONCENTRATION_MICROGRAMS_PER_CUBIC_METER
 from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
 # from homeassistant.components.binary_sensor import BinarySensorDeviceClass
 from homeassistant.components.switch import SwitchDeviceClass
@@ -6,19 +7,13 @@ from homeassistant.components.switch import SwitchDeviceClass
 DEVICE_MAPPING = {
     "default": {
         "rationale": ["off", "on"],
-        "queries": [{}, {"query_type":"run_status"}],
+        "queries": [{}, {"query_type":"run_status"}, {"query_type":"indoor_humidity"}, {"query_type":"indoor_temperature"}],
         "centralized": [],
         "entities": {
             Platform.FAN: {
                 "fan": {
                     "power": "new_wind_machine",
-                    "speeds": [
-                        {"fresh_air_fan_speed": 20},
-                        {"fresh_air_fan_speed": 40},
-                        {"fresh_air_fan_speed": 60},
-                        {"fresh_air_fan_speed": 80},
-                        {"fresh_air_fan_speed": 100},
-                    ],
+                    "speeds": list({"fresh_air_fan_speed": value + 1} for value in range(0, 100)),
                     "preset_modes": {
                         "heat_exchange": {
                             "fresh_air_mode": 1,
@@ -113,6 +108,128 @@ DEVICE_MAPPING = {
                 },
                 "aux_heat": {
                     "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "follow_body_sense_enable": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "rationale": [0, 1]
+                },
+            },
+            Platform.SENSOR: {
+                "mode": {
+                    "device_class": SensorDeviceClass.ENUM,
+                },
+                "indoor_temperature": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "indoor_humidity": {
+                    "device_class": SensorDeviceClass.HUMIDITY,
+                    "unit_of_measurement": "%",
+                    "state_class": SensorStateClass.MEASUREMENT
+                }
+            }
+        }
+    },
+    "22259015": {
+        "rationale": ["off", "on"],
+        "queries": [{}, {"query_type": "run_status"}, {"query_type": "module_30"}, {"query_type": "module_31"},
+                    {"query_type": "module_32"}],
+        "centralized": [],
+        "calculate": {
+            "get": [
+                {
+                    "lvalue": "[indoor_humidity]",
+                    "rvalue": "[humidity_value]"
+                },
+                {
+                    "lvalue": "[indoor_temperature]",
+                    "rvalue": "[t1_temp]"
+                },
+                {
+                    "lvalue": "[co2_value]",
+                    "rvalue": "[co2_concentration]"
+                },
+                {
+                    "lvalue": "[pm25_value]",
+                    "rvalue": "[dust_co2]"
+                }
+            ],
+            "set": []
+        },
+        "entities": {
+            Platform.CLIMATE: {
+                "thermostat": {
+                    "power": "power",
+                    "hvac_modes": {
+                        "off": {"power": "off"},
+                        "heat": {"power": "on", "mode": "heat"},
+                        "cool": {"power": "on", "mode": "cool"},
+                        "auto": {"power": "on", "mode": "auto"},
+                        "dry": {"power": "on", "mode": "dry"},
+                        "fan_only": {"power": "on", "mode": "fan"}
+                    },
+                    "preset_modes": {
+                        "none": {
+                            "eco": "off",
+                            "comfort_power_save": "off",
+                            "cool_power_saving": 0,
+                            "strong_wind": "off"
+                        },
+                        "eco": {"eco": "on", "cool_power_saving": 1},
+                        "comfort": {"comfort_power_save": "on"},
+                        "boost": {"strong_wind": "on"}
+                    },
+                    "swing_modes": {
+                        "off": {"wind_swing_lr": "off", "wind_swing_ud": "off"},
+                        "both": {"wind_swing_lr": "on", "wind_swing_ud": "on"},
+                        "horizontal": {"wind_swing_lr": "on", "wind_swing_ud": "off"},
+                        "vertical": {"wind_swing_lr": "off", "wind_swing_ud": "on"},
+                    },
+                    "fan_modes": {
+                        "silent": {"wind_speed": 20},
+                        "low": {"wind_speed": 40},
+                        "medium": {"wind_speed": 60},
+                        "high": {"wind_speed": 80},
+                        "full": {"wind_speed": 100},
+                        "auto": {"wind_speed": 102}
+                    },
+                    "target_temperature": ["temperature", "small_temperature"],
+                    "current_temperature": "indoor_temperature",
+                    "pre_mode": "mode",
+                    "aux_heat": "ptc",
+                    "min_temp": 17,
+                    "max_temp": 30,
+                    "temperature_unit": UnitOfTemperature.CELSIUS,
+                    "precision": PRECISION_HALVES,
+                }
+            },
+            Platform.SWITCH: {
+                "dry": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "prevent_straight_wind": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "rationale": [0, 1]
+                },
+                "aux_heat": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "follow_body_sense_enable": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "rationale": [0, 1]
+                },
+                "manul_fresh_air": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "auto_comfort_fresh_air": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "auto_fresh_off_co2": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "comfort_fresh_air": {
+                    "device_class": SwitchDeviceClass.SWITCH,
                 }
             },
             Platform.SENSOR: {
@@ -128,6 +245,190 @@ DEVICE_MAPPING = {
                     "device_class": SensorDeviceClass.HUMIDITY,
                     "unit_of_measurement": "%",
                     "state_class": SensorStateClass.MEASUREMENT
+                },
+                "co2_value": {
+                    "device_class": SensorDeviceClass.CO2,
+                    "unit_of_measurement": CONCENTRATION_PARTS_PER_MILLION,
+                    "state_class": SensorStateClass.MEASUREMENT,
+                },
+                "pm25_value": {
+                    "device_class": SensorDeviceClass.PM25,
+                    "unit_of_measurement": CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+                    "state_class": SensorStateClass.MEASUREMENT,
+                },
+            }
+        }
+    },
+    ("22019031", "22019035", "22019045"): {
+        "rationale": ["off", "on"],
+        "queries": [{}, {"query_type":"fresh_air"}, {"query_type":"indoor_humidity"}, {"query_type":"indoor_temperature"}, {"query_type":"outdoor_temperature"}],
+        "centralized": [],
+        "entities": {
+            Platform.FAN: {
+                "fan": {
+                    "power": "fresh_air",
+                    "speeds": [
+                        {"fresh_air": "on", "fresh_air_fan_speed": 40},
+                        {"fresh_air": "on", "fresh_air_fan_speed": 60},
+                        {"fresh_air": "on", "fresh_air_fan_speed": 80},
+                        {"fresh_air": "on", "fresh_air_fan_speed": 100}
+                    ],
+                }
+            },
+            Platform.CLIMATE: {
+                "thermostat": {
+                    "power": "power",
+                    "hvac_modes": {
+                        "off": {"power": "off"},
+                        "heat": {"power": "on", "mode": "heat"},
+                        "cool": {"power": "on", "mode": "cool"},
+                        "auto": {"power": "on", "mode": "auto"},
+                        "dry": {"power": "on", "mode": "dry"},
+                        "fan_only": {"power": "on", "mode": "fan"}
+                    },
+                    "preset_modes": {
+                        "none": {
+                            "eco": "off",
+                            "comfort_power_save": "off",
+                            "cool_power_saving": 0,
+                            # "comfort_sleep": "off",
+                            "strong_wind": "off"
+                        },
+                        "eco": {"eco": "on", "cool_power_saving": 1},
+                        "comfort": {"comfort_power_save": "on"},
+                        # "sleep": {"comfort_sleep": "on"},
+                        "boost": {"strong_wind": "on"}
+                    },
+                    "swing_modes": {
+                        "off": {"wind_swing_lr": "off", "wind_swing_ud": "off"},
+                        "both": {"wind_swing_lr": "on", "wind_swing_ud": "on"},
+                        "horizontal": {"wind_swing_lr": "on", "wind_swing_ud": "off"},
+                        "vertical": {"wind_swing_lr": "off", "wind_swing_ud": "on"},
+                    },
+                    "fan_modes": {
+                        "silent": {"wind_speed": 20},
+                        "low": {"wind_speed": 40},
+                        "medium": {"wind_speed": 60},
+                        "high": {"wind_speed": 80},
+                        "full": {"wind_speed": 100},
+                        "auto": {"wind_speed": 102}
+                    },
+                    "target_temperature": ["temperature", "small_temperature"],
+                    "current_temperature": "indoor_temperature",
+                    "pre_mode": "mode",
+                    "aux_heat": "ptc",
+                    "min_temp": 17,
+                    "max_temp": 30,
+                    "temperature_unit": UnitOfTemperature.CELSIUS,
+                    "precision": PRECISION_HALVES,
+                }
+            },
+            Platform.SWITCH: {
+                "fresh_air_remove_odor": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "rationale": [0, 1],
+                },
+                "dry": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "prevent_straight_wind": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "rationale": [0, 1]
+                },
+                "aux_heat": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "follow_body_sense_enable": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "rationale": [0, 1]
+                },
+            },
+            Platform.SENSOR: {
+                "mode": {
+                    "device_class": SensorDeviceClass.ENUM,
+                },
+                "indoor_temperature": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "outdoor_temperature": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "fresh_air_temp": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "indoor_humidity": {
+                    "device_class": SensorDeviceClass.HUMIDITY,
+                    "unit_of_measurement": "%",
+                    "state_class": SensorStateClass.MEASUREMENT
+                }
+            }
+        }
+    },
+    "17497071": {
+        "rationale": ["off", "on"],
+        "queries": [{}, {"query_type": "water_model_run_status"}],
+        "centralized": [],
+        "entities": {
+            Platform.CLIMATE: {
+                "thermostat": {
+                    "power": "water_model_power",
+                    "hvac_modes": {
+                        "off": {"water_model_power": "off"},
+                        "heat": {"water_model_power": "on"},
+                    },
+                    "preset_modes": {
+                        "auto": {"water_model_temperature_auto": "on", "water_temp_linkage_switch": 0},
+                        "link": {"water_model_temperature_auto": "off", "water_temp_linkage_switch": 1},
+                        "manual": {"water_model_temperature_auto": "off", "water_temp_linkage_switch": 0}
+                    },
+                    "target_temperature": "water_model_temperature_set",
+                    "current_temperature": ["temperature", "small_temperature"],
+                    "pre_mode": "mode",
+                    "aux_heat": "water_model_ptc",
+                    "min_temp": 25,
+                    "max_temp": 60,
+                    "temperature_unit": UnitOfTemperature.CELSIUS,
+                    "precision": PRECISION_HALVES,
+                }
+            },
+            Platform.SWITCH: {
+                "water_model_power_save": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "water_model_go_out": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "water_model_ptc": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "translation_key": "aux_heat",
+                },
+            },
+            Platform.SENSOR: {
+                "tw1_in_water_temp": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "tw1_out_water_temp": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "temperature": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "humidity": {
+                    "device_class": SensorDeviceClass.HUMIDITY,
+                    "unit_of_measurement": "%",
+                    "state_class": SensorStateClass.MEASUREMENT
                 }
             }
         }
@@ -166,13 +467,7 @@ DEVICE_MAPPING = {
             Platform.FAN: {
                 "fan": {
                     "power": "fresh_air",
-                    "speeds": [
-                        {"fresh_air": 3, "fresh_air_fan_speed": 20},
-                        {"fresh_air": 3, "fresh_air_fan_speed": 40},
-                        {"fresh_air": 3, "fresh_air_fan_speed": 60},
-                        {"fresh_air": 3, "fresh_air_fan_speed": 80},
-                        {"fresh_air": 3, "fresh_air_fan_speed": 100},
-                    ],
+                    "speeds": list({"fresh_air": 3, "fresh_air_fan_speed": value + 1} for value in range(0, 100)),
                     "preset_modes": {
                         "heat_exchange": {
                             "fresh_air_mode": 1,
@@ -264,16 +559,13 @@ DEVICE_MAPPING = {
             },
             Platform.SWITCH: {
                 "dry": {
-                    "name": "干燥",
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
                 "prevent_straight_wind": {
-                    "name": "防直吹",
                     "device_class": SwitchDeviceClass.SWITCH,
                     "rationale": [1, 2]
                 },
                 "aux_heat": {
-                    "name": "电辅热",
                     "device_class": SwitchDeviceClass.SWITCH,
                 }
             },
@@ -369,7 +661,6 @@ DEVICE_MAPPING = {
             },
             Platform.SWITCH: {
                 "power": {
-                    "name": "电源",
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
             },

custom_components/midea_auto_cloud/device_mapping/T0xB6.py

@@ -1,4 +1,5 @@
-from homeassistant.const import Platform
+from homeassistant.components.sensor import SensorDeviceClass, SensorStateClass
+from homeassistant.const import Platform, UnitOfPower, UnitOfElectricPotential
 from homeassistant.components.switch import SwitchDeviceClass
 
 DEVICE_MAPPING = {
@@ -6,6 +7,14 @@ DEVICE_MAPPING = {
         "rationale": ["off", "on"],
         "queries": [{}],
         "centralized": [],
+        "calculate": {
+            "get": [
+                {
+                    "lvalue": "[b7_vbattery]",
+                    "rvalue": "float([b7_vbatt] / 1000.0)"
+                },
+            ],
+        },
         "entities": {
             Platform.SWITCH: {
                 "power": {
@@ -18,6 +27,25 @@ DEVICE_MAPPING = {
                     "device_class": SwitchDeviceClass.SWITCH,
                 }
             },
+            Platform.SENSOR: {
+                "error_code": {
+                    "device_class": SensorDeviceClass.ENUM
+                },
+                "b7_left_status": {
+                    "device_class": SensorDeviceClass.ENUM,
+                    "translation_key": "left_status",
+                },
+                "b7_right_status": {
+                    "device_class": SensorDeviceClass.ENUM,
+                    "translation_key": "right_status",
+                },
+                "b7_vbattery":{
+                    "device_class": SensorDeviceClass.VOLTAGE,
+                    "unit_of_measurement": UnitOfElectricPotential.VOLT,
+                    "state_class": SensorStateClass.MEASUREMENT,
+                    "translation_key": "battery_voltage",
+                }
+            },
             Platform.SELECT: {
                 "wind_pressure": {
                     "options": {
@@ -28,6 +56,15 @@ DEVICE_MAPPING = {
                         "extreme": {"wind_pressure": "4"},
                     }
                 },
+                "gear": {
+                    "options": {
+                        "off": {"gear": 0},
+                        "low": {"gear": 1},
+                        "medium": {"gear": 2},
+                        "high": {"gear": 3},
+                        "extreme": {"gear": 4},
+                    }
+                },
             },
         }
     }

custom_components/midea_auto_cloud/device_mapping/T0xBF.py

@@ -0,0 +1,65 @@
+from homeassistant.const import Platform, UnitOfTime, UnitOfArea, UnitOfTemperature
+from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
+from homeassistant.components.binary_sensor import BinarySensorDeviceClass
+
+DEVICE_MAPPING = {
+    "default": {
+        "rationale": ["off", "on"],
+        "queries": [{}],
+        "centralized": [],
+        "calculate": {
+            "get": [
+                {
+                    "lvalue": "[work_time]",
+                    "rvalue": "[work_second] + 60 * [work_minute] + 3600 * [work_hour]"
+                },
+                {
+                    "lvalue": "[set_time]",
+                    "rvalue": "[second_set] + 60 * [minute_set] + 3600 * [hour_set]"
+                }
+            ],
+            "set": [
+            ]
+        },
+        "entities": {
+            Platform.BINARY_SENSOR: {
+                "lack_water": {
+                    "device_class": BinarySensorDeviceClass.RUNNING,
+                    "rationale": [0, 1]
+                },
+                "door_open": {
+                    "device_class": BinarySensorDeviceClass.RUNNING,
+                },
+                "change_water": {
+                    "device_class": BinarySensorDeviceClass.RUNNING,
+                    "rationale": [0, 1]
+                }
+            },
+            Platform.SENSOR: {
+                "work_status": {
+                    "device_class": SensorDeviceClass.ENUM
+                },
+                "cur_temperature_above": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "cur_temperature_underside": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "work_time": {
+                    "device_class": SensorDeviceClass.DURATION,
+                    "unit_of_measurement": UnitOfTime.SECONDS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "set_time": {
+                    "device_class": SensorDeviceClass.DURATION,
+                    "unit_of_measurement": UnitOfTime.SECONDS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+            }
+        }
+    }
+}

custom_components/midea_auto_cloud/device_mapping/T0xC3.py

@@ -0,0 +1,77 @@
+from homeassistant.const import Platform, UnitOfTemperature, PRECISION_HALVES, CONCENTRATION_MICROGRAMS_PER_CUBIC_METER, \
+    CONCENTRATION_PARTS_PER_MILLION
+from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
+from homeassistant.components.switch import SwitchDeviceClass
+
+DEVICE_MAPPING = {
+    "default": {
+        "rationale": ["off", "on"],
+        "queries": [{}],
+        "centralized": [],
+        "entities": {
+            Platform.CLIMATE: {
+                "Zone1": {
+                    "translation_key": "zone1",
+                    "power": "zone1_power_state",
+                    "hvac_modes": {
+                        "off": {"zone1_power_state": "off"},
+                        "heat": {"zone1_power_state": "on"},
+                    },
+                    "target_temperature": "room_temp_set",
+                    "current_temperature": "T4",
+                    "min_temp": "room_min_set_temp",
+                    "max_temp": "room_max_set_temp",
+                    "temperature_unit": UnitOfTemperature.CELSIUS,
+                    "precision": PRECISION_HALVES,
+                },
+                "DHW": {
+                    "translation_key": "dhw",
+                    "power": "dhw_power_state",
+                    "hvac_modes": {
+                        "off": {"dhw_power_state": "off"},
+                        "heat": {"dhw_power_state": "on"},
+                    },
+                    "target_temperature": "dhw_temp_set",
+                    "current_temperature": "T4",
+                    "min_temp": "dhw_min_set_temp",
+                    "max_temp": "dhw_max_set_temp",
+                    "temperature_unit": UnitOfTemperature.CELSIUS,
+                    "precision": PRECISION_HALVES,
+                }
+            },
+            Platform.SWITCH: {
+                "fastdhw_state": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "translation_key": "fastdhw_state",
+                },
+                "forcetbh_state": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "translation_key": "forcetbh_state",
+                },
+            },
+            Platform.SENSOR: {
+                "run_mode_set": {
+                    "device_class": SensorDeviceClass.ENUM,
+                    "translation_key": "mode",
+                },
+                "room_temp_set": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT,
+                    "translation_key": "room_temperature",
+                },
+                "t4": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT,
+                    "translation_key": "outside_temperature",
+                },
+                "tank_actual_temp":{
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT,
+                }
+            }
+        }
+    }
+}

custom_components/midea_auto_cloud/device_mapping/T0xCC.py

@@ -1,4 +1,5 @@
-from homeassistant.const import Platform, UnitOfTemperature, PRECISION_HALVES
+from homeassistant.const import Platform, UnitOfTemperature, PRECISION_HALVES, CONCENTRATION_MICROGRAMS_PER_CUBIC_METER, \
+    CONCENTRATION_PARTS_PER_MILLION
 from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
 from homeassistant.components.switch import SwitchDeviceClass
 
@@ -107,19 +108,19 @@ DEVICE_MAPPING = {
                 },
                 "co2_value": {
                     "device_class": SensorDeviceClass.CO2,
-                    "unit_of_measurement": "ppm",
+                    "unit_of_measurement": CONCENTRATION_PARTS_PER_MILLION,
                     "state_class": SensorStateClass.MEASUREMENT,
                     "attribute": "co2.value"
                 },
                 "hcho_value": {
                     "device_class": SensorDeviceClass.VOLATILE_ORGANIC_COMPOUNDS,
-                    "unit_of_measurement": "μg/m³",
+                    "unit_of_measurement": CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
                     "state_class": SensorStateClass.MEASUREMENT,
                     "attribute": "hcho.value"
                 },
                 "pm25_value": {
                     "device_class": SensorDeviceClass.PM25,
-                    "unit_of_measurement": "μg/m³",
+                    "unit_of_measurement": CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
                     "state_class": SensorStateClass.MEASUREMENT,
                     "attribute": "pm2_5.value"
                 },

custom_components/midea_auto_cloud/device_mapping/T0xCD.py

@@ -0,0 +1,69 @@
+from homeassistant.const import Platform, UnitOfTemperature, UnitOfTime, PERCENTAGE, PRECISION_HALVES, PRECISION_WHOLE
+from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
+from homeassistant.components.binary_sensor import BinarySensorDeviceClass
+from homeassistant.components.switch import SwitchDeviceClass
+
+DEVICE_MAPPING = {
+    "default": {
+        "manufacturer": "美的",
+        "rationale": ["off", "on"],
+        "queries": [{}],
+        "calculate": {
+            "get": [
+                {
+                    "lvalue": "[temperature]",
+                    "rvalue": "float(([set_temperature] - 106) / 74 * 37 + 38)"
+                },
+                {
+                    "lvalue": "[cur_temperature]",
+                    "rvalue": "float(([water_box_temperature] - 106) / 74 * 37 + 38)"
+                }
+            ],
+            "set": [
+                {
+                    "lvalue": "[set_temperature]",
+                    "rvalue": "float(([temperature] - 38) / 37 * 74 + 106)"
+                },
+            ]
+        },
+        "centralized": [],
+        "entities": {
+            Platform.CLIMATE: {
+                "water_heater": {
+                    "power": "power",
+                    "hvac_modes": {
+                        "off": {"power": "off"},
+                        "heat": {"power": "on"},
+                    },
+                    "preset_modes": {
+                        "标准": {"mode": "standard"},
+                        "节能": {"mode": "energy"},
+                        "速热": {"mode": "compatibilizing"},
+                    },
+                    "target_temperature": "temperature",
+                    "current_temperature": "cur_temperature",
+                    "min_temp": 38,
+                    "max_temp": 75,
+                    "temperature_unit": UnitOfTemperature.CELSIUS,
+                    "precision": PRECISION_WHOLE,
+                }
+            },
+            Platform.SWITCH: {
+                "power": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "mute": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+            },
+            Platform.SENSOR: {
+                "cur_temperature": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+            },
+        }
+    }
+}
+

custom_components/midea_auto_cloud/device_mapping/T0xCE.py

@@ -1,4 +1,5 @@
-from homeassistant.const import Platform, UnitOfTemperature, UnitOfTime
+from homeassistant.const import Platform, UnitOfTemperature, UnitOfTime, CONCENTRATION_MICROGRAMS_PER_CUBIC_METER, \
+    CONCENTRATION_PARTS_PER_MILLION
 from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
 from homeassistant.components.binary_sensor import BinarySensorDeviceClass
 from homeassistant.components.switch import SwitchDeviceClass
@@ -168,12 +169,12 @@ DEVICE_MAPPING = {
                 },
                 "pm25_value": {
                     "device_class": SensorDeviceClass.PM25,
-                    "unit_of_measurement": "µg/m³",
+                    "unit_of_measurement": CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
                     "state_class": SensorStateClass.MEASUREMENT
                 },
                 "co2_value": {
                     "device_class": SensorDeviceClass.CO2,
-                    "unit_of_measurement": "ppm",
+                    "unit_of_measurement": CONCENTRATION_PARTS_PER_MILLION,
                     "state_class": SensorStateClass.MEASUREMENT
                 },
                 "machine_type": {

custom_components/midea_auto_cloud/device_mapping/T0xDA.py

@@ -0,0 +1,150 @@
+from homeassistant.const import Platform, UnitOfElectricPotential, UnitOfTemperature, UnitOfTime
+from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
+from homeassistant.components.binary_sensor import BinarySensorDeviceClass
+from homeassistant.components.switch import SwitchDeviceClass
+
+DEVICE_MAPPING = {
+    "default": {
+        "rationale": ["off", "on"],
+        "queries": [{}],
+        "calculate": {
+            "get": [
+                {
+                    "lvalue": "[remain_time]",
+                    "rvalue": "[remain_time]"
+                }
+            ],
+            "set": {
+            }
+        },
+        "entities": {
+            Platform.NUMBER: {
+                "temperature": {
+                    "min": 0,
+                    "max": 100,
+                    "step": 1
+                },
+                "detergent": {
+                    "min": 0,
+                    "max": 5,
+                    "step": 1
+                },
+                "softener": {
+                    "min": 0,
+                    "max": 5,
+                    "step": 1
+                },
+                "dehydration_speed": {
+                    "min": 0,
+                    "max": 1600,
+                    "step": 100
+                },
+                "soak_time": {
+                    "min": 0,
+                    "max": 40,
+                    "step": 10
+                },
+                "wash_time": {
+                    "min": 0,
+                    "max": 20,
+                    "step": 1
+                },
+                "rinse_count": {
+                    "min": 0,
+                    "max": 3,
+                    "step": 1
+                },
+                "dehydration_time": {
+                    "min": 0,
+                    "max": 9,
+                    "step": 1
+                },
+                "wash_level": {
+                    "min": 0,
+                    "max": 8,
+                    "step": 1
+                },
+                "rinse_level": {
+                    "min": 0,
+                    "max": 8,
+                    "step": 1
+                },
+                "wash_strength": {
+                    "min": 1,
+                    "max": 4,
+                    "step": 1
+                },
+            },
+            Platform.BINARY_SENSOR: {
+                "softener_lack": {
+                    "device_class": BinarySensorDeviceClass.PROBLEM,
+                },
+                "detergent_lack": {
+                    "device_class": BinarySensorDeviceClass.PROBLEM,
+                },
+                "door_opened": {
+                    "device_class": BinarySensorDeviceClass.PROBLEM,
+                },
+                "bucket_water_overheating": {
+                    "device_class": BinarySensorDeviceClass.PROBLEM,
+                },
+            },
+            Platform.SWITCH: {
+                "power": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "control_status": {
+                    "rationale": ["pause", "start"],
+                },
+                "lock": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+            },
+            Platform.SELECT: {
+                "mode": {
+                    "options": {
+                        "normal": {"mode": "normal"},
+                        "dry": {"mode": "dry"},
+                        "continus": {"mode": "continus"},
+                    }
+                },
+                "program": {
+                    "options": {
+                        "标准": {"program": "standard"},
+                        "速洗": {"program": "fast"},
+                        "家纺": {"program": "blanket"},
+                        "羊毛": {"program": "wool"},
+                        "浸洗": {"program": "embathe"},
+                        "记忆": {"program": "memory"},
+                        "童装": {"program": "child"},
+                        "强洗": {"program": "strong_wash"},
+                        "桶自洁": {"program": "bucket_self_clean"},
+                    }
+                },
+            },
+            Platform.SENSOR: {
+                "running_status": {
+                    "device_class": SensorDeviceClass.ENUM
+                },
+                "appointment_time": {
+                    "device_class": SensorDeviceClass.DURATION,
+                    "unit_of_measurement": UnitOfTime.MINUTES,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "remain_time": {
+                    "device_class": SensorDeviceClass.DURATION,
+                    "unit_of_measurement": UnitOfTime.MINUTES,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "progress": {
+                    "device_class": SensorDeviceClass.BATTERY,
+                    "unit_of_measurement": "%",
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "error_code": {
+                    "device_class": SensorDeviceClass.ENUM
+                },
+            }
+        }
+    }
+}

custom_components/midea_auto_cloud/device_mapping/T0xDB.py

@@ -18,6 +18,48 @@ DEVICE_MAPPING = {
             }
         },
         "entities": {
+            Platform.NUMBER: {
+                "temperature": {
+                    "min": 0,
+                    "max": 100,
+                    "step": 1
+                },
+                "detergent": {
+                    "min": 0,
+                    "max": 5,
+                    "step": 1
+                },
+                "softener": {
+                    "min": 0,
+                    "max": 5,
+                    "step": 1
+                },
+                "dehydration_time": {
+                    "min": 0,
+                    "max": 9,
+                    "step": 1
+                },
+                "dehydration_speed": {
+                    "min": 0,
+                    "max": 1600,
+                    "step": 100
+                },
+                "dirty_degree": {
+                    "min": 0,
+                    "max": 4,
+                    "step": 1
+                },
+                "soak_count": {
+                    "min": 0,
+                    "max": 5,
+                    "step": 1
+                },
+                "wash_time": {
+                    "min": 0,
+                    "max": 20,
+                    "step": 1
+                },
+            },
             Platform.BINARY_SENSOR: {
                 "softener_lack": {
                     "device_class": BinarySensorDeviceClass.PROBLEM,
@@ -66,19 +108,6 @@ DEVICE_MAPPING = {
                 },
             },
             Platform.SELECT: {
-                "dehydration_speed": {
-                    "options": {
-                        "0": {"dehydration_speed": "0"},
-                        "400": {"dehydration_speed": "400"},
-                        "600": {"dehydration_speed": "600"},
-                        "800": {"dehydration_speed": "800"},
-                        "1000": {"dehydration_speed": "1000"},
-                        "1200": {"dehydration_speed": "1200"},
-                        "1400": {"dehydration_speed": "1400"},
-                        "1600": {"dehydration_speed": "1600"},
-                        "1300": {"dehydration_speed": "1300"}
-                    }
-                },
                 "mode": {
                     "options": {
                         "normal": {"mode": "normal"},
@@ -190,68 +219,11 @@ DEVICE_MAPPING = {
                         "hanfu_wash": {"program": "hanfu_wash"}
                     }
                 },
-                "temperature": {
-                    "options": {
-                        "0": {"temperature": "0"},
-                        "20": {"temperature": "20"},
-                        "30": {"temperature": "30"},
-                        "40": {"temperature": "40"},
-                        "50": {"temperature": "50"},
-                        "60": {"temperature": "60"},
-                        "70": {"temperature": "70"},
-                        "90": {"temperature": "90"},
-                        "95": {"temperature": "95"}
-                    }
-                },
-                "detergent": {
-                    "options": {
-                        "0": {"detergent": "0"},
-                        "1": {"detergent": "1"},
-                        "2": {"detergent": "2"},
-                        "3": {"detergent": "3"},
-                        "4": {"detergent": "4"},
-                        "5": {"detergent": "5"}
-                    }
-                },
-                "softener": {
-                    "options": {
-                        "0": {"softener": "0"},
-                        "1": {"softener": "1"},
-                        "2": {"softener": "2"},
-                        "3": {"softener": "3"},
-                        "4": {"softener": "4"},
-                        "5": {"softener": "5"}
-                    }
-                },
-                "dirty_degree": {
-                    "options": {
-                        "0": {"dirty_degree": "0"},
-                        "1": {"dirty_degree": "1"},
-                        "2": {"dirty_degree": "2"},
-                        "3": {"dirty_degree": "3"},
-                        "4": {"dirty_degree": "4"}
-                    }
-                },
-                "soak_count": {
-                    "options": {
-                        "0": {"soak_count": "0"},
-                        "1": {"soak_count": "1"},
-                        "2": {"soak_count": "2"},
-                        "3": {"soak_count": "3"},
-                        "4": {"soak_count": "4"},
-                        "5": {"soak_count": "5"}
-                    }
-                }
             },
             Platform.SENSOR: {
                 "running_status": {
                     "device_class": SensorDeviceClass.ENUM
                 },
-                "wash_time": {
-                    "device_class": SensorDeviceClass.DURATION,
-                    "unit_of_measurement": UnitOfTime.MINUTES,
-                    "state_class": SensorStateClass.MEASUREMENT
-                },
                 "appointment_time": {
                     "device_class": SensorDeviceClass.DURATION,
                     "unit_of_measurement": UnitOfTime.MINUTES,
@@ -273,11 +245,6 @@ DEVICE_MAPPING = {
                     "unit_of_measurement": "%",
                     "state_class": SensorStateClass.MEASUREMENT
                 },
-                "dehydration_time_value": {
-                    "device_class": SensorDeviceClass.DURATION,
-                    "unit_of_measurement": UnitOfTime.MINUTES,
-                    "state_class": SensorStateClass.MEASUREMENT
-                },
                 "customize_machine_cycle": {
                     "device_class": SensorDeviceClass.ENUM
                 },
@@ -315,11 +282,6 @@ DEVICE_MAPPING = {
                 "active_oxygen": {
                     "device_class": SensorDeviceClass.ENUM
                 },
-                "dehydration_time": {
-                    "device_class": SensorDeviceClass.DURATION,
-                    "unit_of_measurement": UnitOfTime.MINUTES,
-                    "state_class": SensorStateClass.MEASUREMENT
-                },
                 "cloud_cycle_jiepai_time2": {
                     "device_class": SensorDeviceClass.DURATION,
                     "unit_of_measurement": UnitOfTime.MINUTES,

custom_components/midea_auto_cloud/device_mapping/T0xE2.py

@@ -1,4 +1,4 @@
-from homeassistant.const import Platform, UnitOfTemperature, UnitOfTime, PERCENTAGE, PRECISION_HALVES
+from homeassistant.const import Platform, UnitOfTemperature, UnitOfTime, PRECISION_WHOLE
 from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
 from homeassistant.components.binary_sensor import BinarySensorDeviceClass
 from homeassistant.components.switch import SwitchDeviceClass
@@ -10,22 +10,32 @@ DEVICE_MAPPING = {
         "queries": [{}],
         "centralized": [],
         "entities": {
-            Platform.WATER_HEATER: {
+            Platform.NUMBER: {
+                "water_quality": {
+                    "min": 0,
+                    "max": 3,
+                    "step": 1
+                }
+            },
+            Platform.CLIMATE: {
                 "water_heater": {
                     "power": "power",
-                    "operation_list": {
+                    "hvac_modes": {
                         "off": {"power": "off"},
-                        "on": {"power": "on"},
+                        "heat": {"power": "on"},
                     },
                     "target_temperature": "temperature",
                     "current_temperature": "cur_temperature",
                     "min_temp": 30,
-                    "max_temp": 75,
+                    "max_temp": 80,
                     "temperature_unit": UnitOfTemperature.CELSIUS,
-                    "precision": PRECISION_HALVES,
+                    "precision": PRECISION_WHOLE,
                 }
             },
             Platform.SWITCH: {
+                "power": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
                 "ti_protect": {
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
@@ -47,33 +57,8 @@ DEVICE_MAPPING = {
                 "water_flow": {
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
-            },
-            Platform.SELECT: {
-                "water_quality": {
-                    "options": {
-                        "0": {"water_quality": 0},
-                        "1": {"water_quality": 1},
-                        "2": {"water_quality": 2},
-                        "3": {"water_quality": 3}
-                    }
-                },
-                "func_select": {
-                    "options": {
-                        "low": {"func_select": "low"},
-                        "medium": {"func_select": "medium"}
-                    }
-                },
-                "type_select": {
-                    "options": {
-                        "normal": {"type_select": "normal"},
-                        "valve": {"type_select": "valve"},
-                    }
-                },
-                "machine": {
-                    "options": {
-                        "real_machine": {"machine": "real_machine"},
-                        "virtual_machine": {"machine": "virtual_machine"}
-                    }
+                "sterilization": {
+                    "device_class": SwitchDeviceClass.SWITCH,
                 }
             },
             Platform.SENSOR: {
@@ -105,22 +90,18 @@ DEVICE_MAPPING = {
                 "passwater_lowbyte": {
                     "device_class": SensorDeviceClass.WATER,
                     "unit_of_measurement": "L",
-                    "state_class": SensorStateClass.MEASUREMENT
+                    "state_class": SensorStateClass.TOTAL
                 },
                 "passwater_highbyte": {
                     "device_class": SensorDeviceClass.WATER,
                     "unit_of_measurement": "L",
-                    "state_class": SensorStateClass.MEASUREMENT
+                    "state_class": SensorStateClass.TOTAL
                 },
                 "rate": {
-                    "device_class": SensorDeviceClass.WATER,
-                    "unit_of_measurement": "L/min",
-                    "state_class": SensorStateClass.MEASUREMENT
+                    "device_class": SensorDeviceClass.ENUM
                 },
                 "cur_rate": {
-                    "device_class": SensorDeviceClass.WATER,
-                    "unit_of_measurement": "L/min",
-                    "state_class": SensorStateClass.MEASUREMENT
+                    "device_class": SensorDeviceClass.ENUM
                 },
                 "sterilize_left_days": {
                     "device_class": SensorDeviceClass.DURATION,
@@ -148,19 +129,13 @@ DEVICE_MAPPING = {
                     "state_class": SensorStateClass.MEASUREMENT
                 },
                 "tds_value": {
-                    "device_class": SensorDeviceClass.WATER,
-                    "unit_of_measurement": "ppm",
-                    "state_class": SensorStateClass.MEASUREMENT
+                    "device_class": SensorDeviceClass.ENUM
                 },
                 "heat_water_level": {
-                    "device_class": SensorDeviceClass.WATER,
-                    "unit_of_measurement": "%",
-                    "state_class": SensorStateClass.MEASUREMENT
+                    "device_class": SensorDeviceClass.ENUM
                 },
                 "flow": {
-                    "device_class": SensorDeviceClass.WATER,
-                    "unit_of_measurement": "L/min",
-                    "state_class": SensorStateClass.MEASUREMENT
+                    "device_class": SensorDeviceClass.ENUM
                 },
                 "end_time_hour": {
                     "device_class": SensorDeviceClass.DURATION,
@@ -195,19 +170,17 @@ DEVICE_MAPPING = {
                     "state_class": SensorStateClass.MEASUREMENT
                 },
                 "mg_remain": {
-                    "device_class": SensorDeviceClass.WATER,
-                    "unit_of_measurement": "mg",
-                    "state_class": SensorStateClass.MEASUREMENT
+                    "device_class": SensorDeviceClass.ENUM
                 },
                 "waterday_lowbyte": {
                     "device_class": SensorDeviceClass.WATER,
                     "unit_of_measurement": "L",
-                    "state_class": SensorStateClass.MEASUREMENT
+                    "state_class": SensorStateClass.TOTAL
                 },
                 "waterday_highbyte": {
                     "device_class": SensorDeviceClass.WATER,
                     "unit_of_measurement": "L",
-                    "state_class": SensorStateClass.MEASUREMENT
+                    "state_class": SensorStateClass.TOTAL
                 }
             },
             Platform.BINARY_SENSOR: {

custom_components/midea_auto_cloud/device_mapping/T0xE3.py

@@ -10,9 +10,14 @@ DEVICE_MAPPING = {
         "centralized": [],
         "entities": {
             Platform.SWITCH: {
+                "power": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
                 "bubble": {
                     "device_class": SwitchDeviceClass.SWITCH,
-                    "rationale": [0, 1]
+                },
+                "cold_water": {
+                    "device_class": SwitchDeviceClass.SWITCH,
                 },
                 "cold_water_master": {
                     "device_class": SwitchDeviceClass.SWITCH,

custom_components/midea_auto_cloud/device_mapping/T0xE6.py

@@ -0,0 +1,70 @@
+from homeassistant.components.switch import SwitchDeviceClass
+from homeassistant.const import Platform, UnitOfElectricPotential, UnitOfTemperature, UnitOfTime, UnitOfPressure
+from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
+from homeassistant.components.binary_sensor import BinarySensorDeviceClass
+
+DEVICE_MAPPING = {
+    "default": {
+        "rationale": ["off", "on"],
+        "queries": [{}],
+        "entities": {
+            Platform.SWITCH: {
+                "winter_mode": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "summer_mode": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "power": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+            },
+            Platform.SENSOR: {
+                "heat_exchanger": {
+                    "device_class": SensorDeviceClass.ENUM,
+                },
+                "fan_type": {
+                    "device_class": SensorDeviceClass.ENUM,
+                },
+                "ignitor_output": {
+                    "device_class": SensorDeviceClass.ENUM,
+                },
+                "fan_output": {
+                    "device_class": SensorDeviceClass.ENUM,
+                },
+                "current_heat_set_temperature": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "current_bath_set_temperature": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "heat_out_water_temperature": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "bath_out_water_temperature": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "water_gage": {
+                    "unit_of_measurement": UnitOfPressure.PA,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+            },
+            Platform.BINARY_SENSOR: {
+                "heating_work": {
+                    "device_class": BinarySensorDeviceClass.RUNNING
+                },
+                "bathing_work": {
+                    "device_class": BinarySensorDeviceClass.RUNNING
+                },
+            },
+        }
+    }
+}

custom_components/midea_auto_cloud/device_mapping/T0xED.py

@@ -1,5 +1,5 @@
 from homeassistant.const import Platform, UnitOfTemperature, UnitOfTime, UnitOfElectricPotential, \
-    UnitOfVolume, UnitOfMass
+    UnitOfVolume, UnitOfMass, PERCENTAGE
 from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
 from homeassistant.components.binary_sensor import BinarySensorDeviceClass
 from homeassistant.components.switch import SwitchDeviceClass
@@ -17,9 +17,6 @@ DEVICE_MAPPING = {
                 "heat": {
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
-                "antifreeze": {
-                    "device_class": SwitchDeviceClass.SWITCH,
-                },
                 "lock": {
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
@@ -29,22 +26,13 @@ DEVICE_MAPPING = {
                 "keep_warm": {
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
-                "vacation": {
-                    "device_class": SwitchDeviceClass.SWITCH,
-                },
                 "germicidal": {
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
-                "lack_water": {
-                    "device_class": SwitchDeviceClass.SWITCH,
-                },
                 "drainage": {
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
-                "wash_enable": {
-                    "device_class": SwitchDeviceClass.SWITCH,
-                },
-                "water_way": {
+                "wash": {
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
                 "soften": {
@@ -65,14 +53,14 @@ DEVICE_MAPPING = {
                 "cl_sterilization": {
                     "device_class": SwitchDeviceClass.SWITCH,
                 },
-                "holiday_mode": {
-                    "device_class": SwitchDeviceClass.SWITCH,
-                },
             },
             Platform.BINARY_SENSOR: {
                 "heat_status": {
                     "device_class": BinarySensorDeviceClass.RUNNING,
                 },
+                "lack_water": {
+                    "device_class": BinarySensorDeviceClass.PROBLEM,
+                },
                 "standby_status": {
                     "device_class": BinarySensorDeviceClass.RUNNING,
                 },
@@ -129,11 +117,16 @@ DEVICE_MAPPING = {
                     "unit_of_measurement": UnitOfTemperature.CELSIUS,
                     "state_class": SensorStateClass.MEASUREMENT
                 },
-                "water_consumption_ml": {
+                "water_consumption": {
                     "device_class": SensorDeviceClass.VOLUME,
                     "unit_of_measurement": UnitOfVolume.LITERS,
                     "state_class": SensorStateClass.TOTAL_INCREASING
                 },
+                "water_consumption_ml": {
+                    "device_class": SensorDeviceClass.VOLUME,
+                    "unit_of_measurement": UnitOfVolume.MILLILITERS,
+                    "state_class": SensorStateClass.TOTAL_INCREASING
+                },
                 "keep_warm_time": {
                     "device_class": SensorDeviceClass.DURATION,
                     "unit_of_measurement": UnitOfTime.MINUTES,
@@ -258,11 +251,23 @@ DEVICE_MAPPING = {
                 "velocity": {
                     "device_class": SensorDeviceClass.ENUM,
                 },
-                "error": {
-                    "device_class": SensorDeviceClass.ENUM,
+                "life_1": {
+                    "device_class": SensorDeviceClass.BATTERY,
+                    "unit_of_measurement": PERCENTAGE,
                 },
-                "category": {
-                    "device_class": SensorDeviceClass.ENUM,
+                "life_2": {
+                    "device_class": SensorDeviceClass.BATTERY,
+                    "unit_of_measurement": PERCENTAGE,
+                },
+                "in_tds": {
+                    "device_class": SensorDeviceClass.WATER,
+                    "unit_of_measurement": "mg/L",
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "out_tds": {
+                    "device_class": SensorDeviceClass.WATER,
+                    "unit_of_measurement": "mg/L",
+                    "state_class": SensorStateClass.MEASUREMENT
                 },
             }
         }

custom_components/midea_auto_cloud/device_mapping/T0xFA.py

@@ -1,4 +1,5 @@
-from homeassistant.const import Platform, UnitOfTemperature, UnitOfTime, PERCENTAGE
+from homeassistant.const import Platform, UnitOfTemperature, UnitOfTime, PERCENTAGE, DEGREE, \
+    CONCENTRATION_MICROGRAMS_PER_CUBIC_METER
 from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
 from homeassistant.components.binary_sensor import BinarySensorDeviceClass
 from homeassistant.components.switch import SwitchDeviceClass
@@ -23,17 +24,7 @@ DEVICE_MAPPING = {
             Platform.FAN: {
                 "fan": {
                     "power": "power",
-                    "speeds": [
-                        {"gear": "1"},
-                        {"gear": "2"},
-                        {"gear": "3"},
-                        {"gear": "4"},
-                        {"gear": "5"},
-                        {"gear": "6"},
-                        {"gear": "7"},
-                        {"gear": "8"},
-                        {"gear": "9"},
-                    ],
+                    "speeds": list({"gear": value + 1} for value in range(0, 9)),
                     "oscillate": "swing",
                     "preset_modes": {
                         "normal": {"mode": "normal"},
@@ -102,29 +93,9 @@ DEVICE_MAPPING = {
                     "device_class": SensorDeviceClass.ENUM,
                     "state_class": SensorStateClass.MEASUREMENT
                 },
-                "timer_off_hour": {
-                    "device_class": SensorDeviceClass.DURATION,
-                    "unit_of_measurement": UnitOfTime.HOURS,
-                    "state_class": SensorStateClass.MEASUREMENT
-                },
-                "timer_off_minute": {
-                    "device_class": SensorDeviceClass.DURATION,
-                    "unit_of_measurement": UnitOfTime.MINUTES,
-                    "state_class": SensorStateClass.MEASUREMENT
-                },
-                "timer_on_hour": {
-                    "device_class": SensorDeviceClass.DURATION,
-                    "unit_of_measurement": UnitOfTime.HOURS,
-                    "state_class": SensorStateClass.MEASUREMENT
-                },
-                "timer_on_minute": {
-                    "device_class": SensorDeviceClass.DURATION,
-                    "unit_of_measurement": UnitOfTime.MINUTES,
-                    "state_class": SensorStateClass.MEASUREMENT
-                },
                 "pm25": {
                     "device_class": SensorDeviceClass.PM25,
-                    "unit_of_measurement": "µg/m³",
+                    "unit_of_measurement": CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
                     "state_class": SensorStateClass.MEASUREMENT
                 },
                 "ud_swing_angle": {
@@ -153,5 +124,86 @@ DEVICE_MAPPING = {
                 }
             }
         }
+    },
+    "xxxxxx": {
+        "rationale": ["off", "on"],
+        "queries": [{}],
+        "centralized": [
+            "power", "gear"
+        ],
+        "entities": {
+            Platform.SWITCH: {
+                "display_on_off": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                    "rationale": ["on", "off"]
+                },
+                "anion": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "temp_wind_switch": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+            },
+            Platform.FAN: {
+                "fan": {
+                    "power": "power",
+                    "speeds": list({"gear": value + 1} for value in range(0, 100)),
+                    "preset_modes": {
+                        "self_selection": {"mode": "self_selection"},
+                        "sleeping_wind": {"mode": "sleeping_wind"},
+                        "purified_wind": {"mode": "purified_wind"}
+                    }
+                }
+            },
+            Platform.SELECT: {
+                "voice": {
+                    "options": {
+                        "open_buzzer": {"voice": "open_buzzer"},
+                        "close_buzzer": {"voice": "close_buzzer"},
+                        "mute": {"voice": "mute"}
+                    }
+                },
+                "lr_shake_switch": {
+                    "options": {
+                        "off": {"lr_shake_switch": "off"},
+                        "default": {"lr_shake_switch": "default"},
+                        "normal": {"lr_shake_switch": "normal"},
+                    }
+                },
+                "ud_shake_switch": {
+                    "options": {
+                        "off": {"ud_shake_switch": "off"},
+                        "default": {"ud_shake_switch": "default"},
+                        "normal": {"ud_shake_switch": "normal"},
+                    }
+                },
+            },
+            Platform.SENSOR: {
+                "real_gear": {
+                    "device_class": SensorDeviceClass.ENUM,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "dust_life_time": {
+                    "device_class": SensorDeviceClass.DURATION,
+                    "unit_of_measurement": UnitOfTime.HOURS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "filter_life_time": {
+                    "device_class": SensorDeviceClass.DURATION,
+                    "unit_of_measurement": UnitOfTime.HOURS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "current_angle": {
+                    "device_class": SensorDeviceClass.WIND_DIRECTION,
+                    "unit_of_measurement": DEGREE,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "target_angle": {
+                    "device_class": SensorDeviceClass.WIND_DIRECTION,
+                    "unit_of_measurement": DEGREE,
+                    "state_class": SensorStateClass.MEASUREMENT
+                }
+            }
+        }
     }
 }

custom_components/midea_auto_cloud/device_mapping/T0xFC.py

@@ -0,0 +1,103 @@
+from homeassistant.const import Platform, UnitOfTemperature, UnitOfVolume, UnitOfTime, PERCENTAGE, PRECISION_HALVES, \
+    UnitOfEnergy, UnitOfPower, CONCENTRATION_MICROGRAMS_PER_CUBIC_METER
+from homeassistant.components.sensor import SensorStateClass, SensorDeviceClass
+from homeassistant.components.binary_sensor import BinarySensorDeviceClass
+from homeassistant.components.switch import SwitchDeviceClass
+
+DEVICE_MAPPING = {
+    "default": {
+        "rationale": ["off", "on"],
+        "queries": [{}],
+        "centralized": [],
+        "entities": {
+            Platform.SWITCH: {
+                "power": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "anion": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "buzzer": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "lock": {
+                    "device_class": SwitchDeviceClass.SWITCH,
+                },
+                "waterions":{
+                    "device_class": SwitchDeviceClass.SWITCH,
+                }
+            },
+            Platform.SELECT: {
+                "mode": {
+                    "options": {
+                        "constant_humidity": {"mode": "constant_humidity"},
+                        "manual": {"mode": "manual"},
+                        "sleep": {"mode": "sleep"},
+                        "fast": {"mode": "fast"},
+                        "auto": {"mode": "auto"},
+                    }
+                },
+                "bias_gear":{
+                    "options": {
+                        "瑜伽静修场景": {"mode": "auto", "sub_mode": "denoise", "bias_gear": -20},
+                        "室内对话场景": {"mode": "auto", "sub_mode": "denoise", "bias_gear": -10}
+                    }
+                },
+                "bright": {
+                    "options": {
+                        "全亮": {"bright": 0},
+                        "半亮": {"bright": 6},
+                        "熄灭": {"bright": 7}
+                    }
+                },
+                "gear": {
+                    "options": {
+                        "low": {"wind_speed": 1},
+                        "medium": {"wind_speed": 2},
+                        "high": {"wind_speed": 3}
+                    }
+                },
+                "humidity": {
+                    "options": {
+                        "40%": {"humidity": 40},
+                        "50%": {"humidity": 50},
+                        "60%": {"humidity": 60},
+                        "70%": {"humidity": 70}
+                    }
+                },
+            },
+            Platform.SENSOR: {
+                "temperature_feedback": {
+                    "device_class": SensorDeviceClass.TEMPERATURE,
+                    "unit_of_measurement": UnitOfTemperature.CELSIUS,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "humidify_feedback": {
+                    "device_class": SensorDeviceClass.HUMIDITY,
+                    "unit_of_measurement": "%",
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "hcho":{
+                    "device_class": SensorDeviceClass.VOLATILE_ORGANIC_COMPOUNDS,
+                    "unit_of_measurement": CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "pm1":{
+                    "device_class": SensorDeviceClass.PM1,
+                    "unit_of_measurement": CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "pm25":{
+                    "device_class": SensorDeviceClass.PM25,
+                    "unit_of_measurement": CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+                    "state_class": SensorStateClass.MEASUREMENT
+                },
+                "pm10":{
+                    "device_class": SensorDeviceClass.PM10,
+                    "unit_of_measurement": CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+                    "state_class": SensorStateClass.MEASUREMENT
+                }
+            }
+        }
+    }
+}

custom_components/midea_auto_cloud/fan.py

@@ -54,7 +54,18 @@ class MideaFanEntity(MideaEntity, FanEntity):
         )
         self._key_power = self._config.get("power")
         self._key_preset_modes = self._config.get("preset_modes")
-        self._key_speeds = self._config.get("speeds")
+        speeds_config = self._config.get("speeds")
+        # 处理范围形式的 speeds 配置: {"key": "gear", "value": [1, 9]}
+        if isinstance(speeds_config, dict) and "key" in speeds_config and "value" in speeds_config:
+            key_name = speeds_config["key"]
+            value_range = speeds_config["value"]
+            if isinstance(value_range, list) and len(value_range) == 2:
+                start, end = value_range[0], value_range[1]
+                self._key_speeds = [{key_name: str(i)} for i in range(start, end + 1)]
+            else:
+                self._key_speeds = speeds_config
+        else:
+            self._key_speeds = speeds_config
         self._key_oscillate = self._config.get("oscillate")
         self._key_directions = self._config.get("directions")
         self._attr_speed_count = len(self._key_speeds) if self._key_speeds else 0
@@ -80,10 +91,14 @@ class MideaFanEntity(MideaEntity, FanEntity):
 
     @property
     def preset_modes(self):
+        if self._key_preset_modes is None:
+            return None
         return list(self._key_preset_modes.keys())
 
     @property
     def preset_mode(self):
+        if self._key_preset_modes is None:
+            return None
         return self._dict_get_selected(self._key_preset_modes)
 
     @property
@@ -97,6 +112,10 @@ class MideaFanEntity(MideaEntity, FanEntity):
     def oscillating(self):
         return self._get_status_on_off(self._key_oscillate)
 
+    @property
+    def current_direction(self):
+        return self._dict_get_selected(self._key_directions)
+
     async def async_turn_on(
             self,
             percentage: int | None = None,
@@ -136,3 +155,9 @@ class MideaFanEntity(MideaEntity, FanEntity):
         if self.oscillating != oscillating:
             await self._async_set_status_on_off(self._key_oscillate, oscillating)
 
+    async def async_set_direction(self, direction: str):
+        if not self._key_directions:
+            return
+        new_status = self._key_directions.get(direction)
+        if new_status:
+            await self.async_set_attributes(new_status)

custom_components/midea_auto_cloud/manifest.json

@@ -7,5 +7,5 @@
   "iot_class": "cloud_push",
   "issue_tracker": "https://github.com/sususweet/midea-meiju-codec/issues",
   "requirements": ["lupa>=2.0"],
-  "version": "v0.1.16"
+  "version": "v0.1.26"
 }

custom_components/midea_auto_cloud/midea_entity.py

@@ -125,7 +125,7 @@ class MideaEntity(CoordinatorEntity[MideaDataUpdateCoordinator], Entity):
     @property
     def device_attributes(self) -> dict:
         """Return device attributes."""
-        return self.coordinator.data.attributes
+        return self.coordinator.data.attributes if self.coordinator.data else {}
 
     @property
     def available(self) -> bool:

custom_components/midea_auto_cloud/translations/en.json

@@ -123,6 +123,12 @@
   },
   "entity": {
     "binary_sensor": {
+      "heating_work": {
+        "name": "Heating Work"
+      },
+      "bathing_work": {
+        "name": "Bathing Work"
+      },
       "doorswitch": {
         "name": "Door Switch"
       },
@@ -314,6 +320,13 @@
       "thermostat": {
         "name": "Thermostat",
         "state_attributes": {
+          "preset_modes": {
+            "state": {
+              "auto": "auto",
+              "link": "link",
+              "manual": "manual"
+            }
+          },
           "fan_mode": {
             "state": {
               "silent": "Silent",
@@ -322,6 +335,12 @@
           }
         }
       },
+      "zone1": {
+        "name": "区域1"
+      },
+      "dhw": {
+        "name": "DHW"
+      },
       "colmo_turing_central_ac_climate": {
         "name": "Thermostat",
         "state_attributes": {
@@ -349,6 +368,39 @@
       }
     },
     "select": {
+      "bright": {
+        "name": "Brightness"
+      },
+      "bias_gear": {
+        "name": "Bias Gear"
+      },
+      "humidity": {
+        "name": "Humidity"
+      },
+      "b3_function_control": {
+        "name": "Disinfection Cabinet Control"
+      },
+      "b6_power": {
+        "name": "Smoke Machine Power"
+      },
+      "b6_power_on_light": {
+        "name": "Smoke Machine Power On Light"
+      },
+      "b6_lock": {
+        "name": "Smoke Machine Lock"
+      },
+      "b6_gear": {
+        "name": "Smoke Machine Gear"
+      },
+      "b6_smoke_stove_linkage_gear": {
+        "name": "Smoke Stove Linkage Gear"
+      },
+      "b6_delay_gear_linkage_gear": {
+        "name": "Smoke Machine Delay Gear Linkage Gear"
+      },
+      "b6_delay_time_value": {
+        "name": "Smoke Machine Delay Time (Minute)"
+      },
       "warm_target_temp": {
         "name": "Warm Target Temperature"
       },
@@ -367,12 +419,6 @@
       "control_type": {
         "name": "Control Type"
       },
-      "dehydration_speed": {
-        "name": "Dehydration Speed"
-      },
-      "db_dehydration_speed": {
-        "name": "DB Dehydration Speed"
-      },
       "db_detergent": {
         "name": "DB Detergent"
       },
@@ -403,9 +449,6 @@
       "detergent_density": {
         "name": "Detergent Density"
       },
-      "dirty_degree": {
-        "name": "Dirty Degree"
-      },
       "disinfectant": {
         "name": "Disinfectant"
       },
@@ -490,9 +533,6 @@
       "season": {
         "name": "Season"
       },
-      "soak_count": {
-        "name": "Soak Count"
-      },
       "softener_density": {
         "name": "Softener Density"
       },
@@ -544,9 +584,6 @@
       "type_select": {
         "name": "Type Select"
       },
-      "water_quality": {
-        "name": "Water Quality"
-      },
       "work_status": {
         "name": "Work Status"
       },
@@ -571,15 +608,6 @@
       "gear": {
         "name": "Gear"
       },
-      "detergent": {
-        "name": "Detergent"
-      },
-      "softener": {
-        "name": "Softener"
-      },
-      "temperature": {
-        "name": "Temperature"
-      },
       "ptc": {
         "name": "PTC"
       },
@@ -630,6 +658,9 @@
       }
     },
     "sensor": {
+      "fresh_air_temp": {
+        "name": "Fresh Air Temp"
+      },
       "running_status": {
         "name": "Running Status"
       },
@@ -645,6 +676,9 @@
       "move_direction": {
         "name": "Move Direction"
       },
+      "work_status": {
+        "name": "Work Status"
+      },
       "sub_work_status": {
         "name": "Sub Work Status"
       },
@@ -672,6 +706,21 @@
       "auto_min_set_temp": {
         "name": "Auto Min Set Temp"
       },
+      "b3_upstair_status": {
+        "name": "Disinfection Cabinet Status"
+      },
+      "b7_left_status": {
+        "name": "Left Stove Status"
+      },
+      "b7_left_gear": {
+        "name": "Left Stove Gear"
+      },
+      "b7_right_status": {
+        "name": "Right Stove Status"
+      },
+      "b7_right_gear": {
+        "name": "Left Stove Gear"
+      },
       "bath_out_volume": {
         "name": "Bath Out Volume"
       },
@@ -1200,6 +1249,9 @@
       "work_time": {
         "name": "Work Time"
       },
+      "set_time": {
+        "name": "Set Time"
+      },
       "zero_cold_tem": {
         "name": "Zero Cold Temperature"
       },
@@ -1383,6 +1435,48 @@
       "ud_diy_up_percent": {
         "name": "UD DIY Up Percent"
       },
+      "heat_exchanger": {
+        "name": "Heat Exchanger Mode"
+      },
+      "fan_type": {
+        "name": "Fan Type"
+      },
+      "ignitor_output": {
+        "name": "Ignitor Output"
+      },
+      "fan_output": {
+        "name": "Fan Output"
+      },
+      "current_heat_set_temperature": {
+        "name": "Current Heat Set Temperature"
+      },
+      "current_bath_set_temperature": {
+        "name": "Current Bath Set Temperature"
+      },
+      "heat_out_water_temperature": {
+        "name": "Heat Out Water Temperature"
+      },
+      "bath_out_water_temperature": {
+        "name": "Bath Out Water Temperature"
+      },
+      "water_gage": {
+        "name": "Water Gage"
+      },
+      "in_tds": {
+        "name": "In TDS"
+      },
+      "out_tds": {
+        "name": "Out TDS"
+      },
+      "life_1": {
+        "name": "RO Filter Cartridge Lifespan"
+      },
+      "life_2": {
+        "name": "MPC Filter Cartridge Lifespan"
+      },
+      "water_consumption": {
+        "name": "Water Consumption"
+      },
       "water_consumption_ml": {
         "name": "Water Consumption (ml)"
       },
@@ -1437,6 +1531,9 @@
       "left_status": {
         "name": "Left Status"
       },
+      "right_status": {
+        "name": "Right Status"
+      },
       "eq_recipe_action": {
         "name": "Eq Recipe Action"
       },
@@ -1502,6 +1599,12 @@
       },
       "heat_temp_set": {
         "name": "Heat Temperature Set"
+      },
+      "tw1_in_water_temp": {
+        "name": "Inlet Water Temperature"
+      },
+      "tw1_out_water_temp": {
+        "name": "Outlet Water Temperature"
       }
     },
     "light": {
@@ -1509,12 +1612,80 @@
         "name": "Light"
       }
     },
+    "number": {
+      "water_quality": {
+        "name": "Water Quality"
+      },
+      "b6_lightness": {
+        "name": "Smoke Machine Lightness"
+      },
+      "dehydration_speed": {
+        "name": "Dehydration Speed"
+      },
+      "db_dehydration_speed": {
+        "name": "DB Dehydration Speed"
+      },
+      "detergent": {
+        "name": "Detergent"
+      },
+      "softener": {
+        "name": "Softener"
+      },
+      "temperature": {
+        "name": "Temperature"
+      },
+      "soak_count": {
+        "name": "Soak Count"
+      },
+      "dirty_degree": {
+        "name": "Dirty Degree"
+      },
+      "soak_time": {
+        "name": "Soak Time"
+      },
+      "wash_time": {
+        "name": "Wash Time"
+      },
+      "rinse_count": {
+        "name": "Rinse Count"
+      },
+      "dehydration_time": {
+        "name": "Dehydration Time"
+      },
+      "wash_level": {
+        "name": "Wash Level"
+      },
+      "rinse_level": {
+        "name": "Rinse Level"
+      },
+      "wash_strength": {
+        "name": "Water Strength"
+      }
+    },
     "fan": {
       "fan": {
         "name": "Fan"
       }
     },
     "switch": {
+      "winter_mode": {
+        "name": "Winter Mode"
+      },
+      "summer_mode": {
+        "name": "Summer Mode"
+      },
+      "follow_body_sense_enable": {
+        "name": "Follow Body Sense"
+      },
+      "waterions": {
+        "name": "Disinfection"
+      },
+      "mute": {
+        "name": "Mute"
+      },
+      "b6_light": {
+        "name": "Smoke Machine Light"
+      },
       "temp_wind_switch": {
         "name": "Wind Change with Temperature"
       },
@@ -1762,7 +1933,7 @@
         "name": "CO2 Check Enable"
       },
       "cold_water": {
-        "name": "Cold Water"
+        "name": "Cold Water Single Loop"
       },
       "cold_water_ai": {
         "name": "Cold Water AI"
@@ -2399,6 +2570,18 @@
       },
       "work_switch": {
         "name": "Work Switch"
+      },
+      "water_model_power_save": {
+        "name": "Power Save Mode"
+      },
+      "water_model_go_out": {
+        "name": "Away Mode"
+      },
+      "fastdhw_state": {
+        "name": "Fast Hot Water"
+      },
+      "forcetbh_state": {
+        "name": "Force Standby"
       }
     }
   }

custom_components/midea_auto_cloud/translations/zh-Hans.json

@@ -123,6 +123,12 @@
   },
   "entity": {
     "binary_sensor": {
+      "heating_work": {
+        "name": "采暖功能状态"
+      },
+      "bathing_work": {
+        "name": "生活热水工作状态"
+      },
       "doorswitch": {
         "name": "门锁开关"
       },
@@ -314,6 +320,13 @@
       "thermostat": {
         "name": "温控器",
         "state_attributes": {
+          "preset_modes": {
+            "state": {
+              "auto": "自动",
+              "link": "联动",
+              "manual": "手动"
+            }
+          },
           "fan_mode": {
             "state": {
               "silent": "静音",
@@ -322,6 +335,12 @@
           }
         }
       },
+      "zone1": {
+        "name": "区域1"
+      },
+      "dhw": {
+        "name": "DHW"
+      },
       "colmo_turing_central_ac_climate": {
         "name": "温控器",
         "state_attributes": {
@@ -353,6 +372,39 @@
       }
     },
     "select": {
+      "bright": {
+        "name": "亮度"
+      },
+      "bias_gear": {
+        "name": "降噪设置"
+      },
+      "humidity": {
+        "name": "设定湿度"
+      },
+      "b3_function_control": {
+        "name": "消毒柜控制"
+      },
+      "b6_power": {
+        "name": "烟机开关"
+      },
+      "b6_power_on_light": {
+        "name": "烟机开机开灯"
+      },
+      "b6_lock": {
+        "name": "烟机锁屏"
+      },
+      "b6_gear": {
+        "name": "烟机档位"
+      },
+      "b6_smoke_stove_linkage_gear": {
+        "name": "烟灶联动档位"
+      },
+      "b6_delay_gear_linkage_gear": {
+        "name": "烟机延时关机风速档位"
+      },
+      "b6_delay_time_value": {
+        "name": "烟机延时关机时间（分钟）"
+      },
       "warm_target_temp": {
         "name": "保温目标温度"
       },
@@ -371,12 +423,6 @@
       "control_type": {
         "name": "控制类型"
       },
-      "dehydration_speed": {
-        "name": "脱水转速"
-      },
-      "db_dehydration_speed": {
-        "name": "脱水转速"
-      },
       "db_detergent": {
         "name": "洗涤剂"
       },
@@ -407,9 +453,6 @@
       "detergent_density": {
         "name": "洗涤剂浓度"
       },
-      "dirty_degree": {
-        "name": "脏污程度"
-      },
       "disinfectant": {
         "name": "消毒剂"
       },
@@ -494,9 +537,6 @@
       "season": {
         "name": "季节"
       },
-      "soak_count": {
-        "name": "浸泡次数"
-      },
       "softener_density": {
         "name": "柔顺剂浓度"
       },
@@ -551,9 +591,6 @@
       "type_select": {
         "name": "类型选择"
       },
-      "water_quality": {
-        "name": "水质"
-      },
       "work_status": {
         "name": "工作状态"
       },
@@ -575,15 +612,6 @@
       "gear": {
         "name": "档位"
       },
-      "detergent": {
-        "name": "洗涤剂"
-      },
-      "softener": {
-        "name": "柔顺剂"
-      },
-      "temperature": {
-        "name": "温度"
-      },
       "ptc": {
         "name": "电辅热"
       },
@@ -634,6 +662,9 @@
       }
     },
     "sensor": {
+      "fresh_air_temp": {
+        "name": "新风温度"
+      },
       "running_status": {
         "name": "运行状态"
       },
@@ -649,6 +680,9 @@
       "move_direction": {
         "name": "移动方向"
       },
+      "work_status": {
+        "name": "工作状态"
+      },
       "sub_work_status": {
         "name": "子工作状态"
       },
@@ -676,6 +710,21 @@
       "auto_min_set_temp": {
         "name": "自动最小设定温度"
       },
+      "b3_upstair_status": {
+        "name": "消毒柜状态"
+      },
+      "b7_left_status": {
+        "name": "左灶状态"
+      },
+      "b7_left_gear": {
+        "name": "左灶档位"
+      },
+      "b7_right_status": {
+        "name": "右灶状态"
+      },
+      "b7_right_gear": {
+        "name": "右灶档位"
+      },
       "bath_out_volume": {
         "name": "浴缸出水量"
       },
@@ -1204,6 +1253,9 @@
       "work_time": {
         "name": "工作时间"
       },
+      "set_time": {
+        "name": "设置工作时间"
+      },
       "zero_cold_tem": {
         "name": "零冷水温度"
       },
@@ -1387,6 +1439,48 @@
       "ud_diy_up_percent": {
         "name": "上下自定义上百分比"
       },
+      "heat_exchanger": {
+        "name": "采暖模式"
+      },
+      "fan_type": {
+        "name": "风机模式"
+      },
+      "ignitor_output": {
+        "name": "点火状态"
+      },
+      "fan_output": {
+        "name": "风机状态"
+      },
+      "current_heat_set_temperature": {
+        "name": "当前采暖设定温度"
+      },
+      "current_bath_set_temperature": {
+        "name": "当前生活热水设定温度"
+      },
+      "heat_out_water_temperature": {
+        "name": "采暖出水实际温度"
+      },
+      "bath_out_water_temperature": {
+        "name": "生活用水出水实际温度"
+      },
+      "water_gage": {
+        "name": "水压"
+      },
+      "in_tds": {
+        "name": "进水TDS"
+      },
+      "out_tds": {
+        "name": "出水TDS"
+      },
+      "life_1": {
+        "name": "RO滤芯寿命"
+      },
+      "life_2": {
+        "name": "MPC滤芯寿命"
+      },
+      "water_consumption": {
+        "name": "用水量"
+      },
       "water_consumption_ml": {
         "name": "用水量(毫升)"
       },
@@ -1441,6 +1535,9 @@
       "left_status": {
         "name": "左侧状态"
       },
+      "right_status": {
+        "name": "右侧状态"
+      },
       "eq_recipe_action": {
         "name": "等量食谱动作"
       },
@@ -1506,6 +1603,12 @@
       },
       "heat_temp_set": {
         "name": "制热设定温度"
+      },
+      "tw1_in_water_temp": {
+        "name": "进水温度"
+      },
+      "tw1_out_water_temp": {
+        "name": "出水温度"
       }
     },
     "light": {
@@ -1513,12 +1616,80 @@
         "name": "电灯"
       }
     },
+    "number": {
+      "water_quality": {
+        "name": "水质"
+      },
+      "b6_lightness": {
+        "name": "烟机照明"
+      },
+      "dehydration_speed": {
+        "name": "脱水转速"
+      },
+      "db_dehydration_speed": {
+        "name": "脱水转速"
+      },
+      "detergent": {
+        "name": "洗涤剂"
+      },
+      "softener": {
+        "name": "柔顺剂"
+      },
+      "temperature": {
+        "name": "温度"
+      },
+      "soak_count": {
+        "name": "浸泡次数"
+      },
+      "dirty_degree": {
+        "name": "脏污程度"
+      },
+      "soak_time": {
+        "name": "浸泡时间"
+      },
+      "wash_time": {
+        "name": "洗涤时间"
+      },
+      "rinse_count": {
+        "name": "漂洗次数"
+      },
+      "dehydration_time": {
+        "name": "脱水时间"
+      },
+      "wash_level": {
+        "name": "洗涤水位"
+      },
+      "rinse_level": {
+        "name": "漂洗水位"
+      },
+      "wash_strength": {
+        "name": "水流强度"
+      }
+    },
     "fan": {
       "fan": {
         "name": "风扇"
       }
     },
     "switch": {
+      "winter_mode": {
+        "name": "冬季模式"
+      },
+      "summer_mode": {
+        "name": "夏季模式"
+      },
+      "follow_body_sense_enable": {
+        "name": "随身感"
+      },
+      "waterions": {
+        "name": "消杀"
+      },
+      "mute": {
+        "name": "静音"
+      },
+      "b6_light": {
+        "name": "烟机灯"
+      },
       "temp_wind_switch": {
         "name": "风随温变"
       },
@@ -1766,7 +1937,7 @@
         "name": "CO2检测启用"
       },
       "cold_water": {
-        "name": "零冷水"
+        "name": "零冷水单次循环"
       },
       "cold_water_ai": {
         "name": "AI零冷水"
@@ -2403,6 +2574,18 @@
       },
       "work_switch": {
         "name": "工作开关"
+      },
+      "water_model_power_save": {
+        "name": "节能模式"
+      },
+      "water_model_go_out": {
+        "name": "外出模式"
+      },
+      "fastdhw_state": {
+        "name": "快速生活热水"
+      },
+      "forcetbh_state": {
+        "name": "强制待机"
       }
     }
   }