Workspace and hotseat are drawn in rotated UI giving the impression that the
device is in Portrait, even though it is in landscape
Bug: 131360075
Change-Id: I29c4068af25fd4dcf7039b9a45886e864a137977
- Added QuickSwitchState, which we animate to when swiping right
on the nav bar from NORMAL state
- Task launches when the state transition to QuickSwitchState ends
Bug: 126596417
Change-Id: Id66650401d817703fc6d044fb26a25cccbc07e11
Add AnimationComponents.ATOMIC_OVERVIEW_PEEK_COMPONENT, and rename
previous ATOMIC_COMPONENT to ATOMIC_OVERVIEW_SCALE_COMPONENT.
When SWIPE_HOME is enabled:
- Overview lives to the left of Workspace, which is encoded in
LauncherState.NORMAL.getOverviewScaleAndTranslation().
- Create atomic animation based on ATOMIC_OVERVIEW_PEEK_COMPONENT
and OVERVIEW_PEEK state when swiping and holding from home screen.
Bug: 111926330
Change-Id: Iab6dbef7238dae15b3036d4b2a026b781eee6b4b
States return ScaleAndTranslation instead of float[].
Also separate overview translate interpolator from overview scale interpolator.
Change-Id: I5e65dde3f436055ff5e7f5736f1a4b712377b9cb
Before, we just didn't scale or translate when entering spring loaded
state. That worked when dragging from home, but when dragging from all
apps it meant that the hotseat kept its translation from the transition
to all apps. Now we always move the hotseat to scale 1 and translation 0
when going to spring loaded mode.
Change-Id: I0630d5bb899e37e2ab01516adfc1b7e6f8a9e42a
- Move the hotseat alongside workspace instead of on top of all apps in xml layout
- Set pivot point of hotseat to match the workspace's, and apply the same scale
- Translate the hotseat with the workspace instead of all apps
- SpringLoadedState does not scale or translate the hotseat
Change-Id: Ic45fe99f83f0e0012afa78073d9577e65da444e2
When we enter overview (overview appears, workspace disappears):
- Workspace scales down from 1f to .8f with OvershootInterpolator(1.2f) at 200 ms
- Workspace fades from 1f to 0 with OvershootInterpolator(1.2f) at 200 ms
- Overview scales down from 1.33f to 1f with OvershootInterpolator(1.2f) at 200 ms
- Overview fades from 0 to 1f with OvershootInterpolator(1.2f) at 200 ms
When we exit overview (overview disappears, workspace appears):
- Workspace scales up from .92f to .1f with DecelerateInterpolator() at 200 ms
- Workspace fades from 0 to 1f with AccelerateInterpolator() at 200 ms
- Overview scales up from 1f to 1.1f with AccelerateInterpolator() at 180ms
- Overview fades from 1f to 0 with DecelerateInterpolator(1.7f) at 200 ms
Parallax while the finger moves: Workspace translates half the distance as the shelf
Bug: 79776746
Change-Id: I319d982cf202bcd6dbbcd68ffc5c0c7853629c7e
> Moving all the scrims to draglayer to avoid creating multiple layers during
various animations
> Removing sys-ui scrim in various states which alread have a background scrim
Bug: 74556464
Bug: 78585335
Change-Id: I8a3fd34ed440f3c7d2e19b3cdb4b72723c535602
> Caret is only visible when the accessibility is enabled
> It is visible in NOTMAL and OVERVIEW state and moves out of the
scrim along with the scrim.
> Acts as an accessible target for various options
Bug: 78172350
Bug: 79215734
Change-Id: I8a968b67e36901859649546295f6491d49cc9ce9
State handlers can now specify atomic and non-atomic components of
their animations to states, which can be specified when creating a
new animation. There is now one atomic animation, when going from
NORMAL to OVERVIEW (and in reverse):
- RecentsViewStateController's animation (scale/alpha) is all atomic
- WorkspaceStateTransitionAnimation has atomic and non-atomic:
- Hotseat and workspace alpha is atomic, as is workspace scale
- Everything else (scrim, translation, qsb and drag handle alpha) is
non-atomic
- All apps progress is non-atomic
Also simplified dragging through overview; no longer pulls against you,
so we use an OvershootInterpolator when flinging instead of our custom
interpolator for the spring effect.
Bug: 76449024
Bug: 78089840
Change-Id: Iafac84d0c2b99ee9cf9dd5b30e2218286713b449
> Converting the scrim to View, to better avoid overdraw
> Overview and Spring loaded state have different scrim alpha
> When going from overview to all-apps, there is a color scrim drawn over the overview panel.
The slef color is merged with this color to prevent overdraw, and the remaining screen is drawn
with a cut-out round rect path
Bug: 79111591
Change-Id: I26801fde13dd6adb4b06110bbe8087e35cc31847
Previously, user-controlled animations weren't properly being canceled when a
non-user-controlled animation started, e.g. when hitting home. Thus, we could
end in the wrong or inconsistent state because the user-controlled animation's
end runnable was still used. Now we add a cleanup callback for when we reset
the user-controlled animation for one that isn't user-controlled.
Also fixed a couple typos.
Tests (easier with animation durations extended):
- Swipe up and hit home before reaching overview -> land on home
- Go to overview, swipe down slightly (before threshold to go to workspace)
and let go -> return to overview without flash (recents was resetting)
- Swipe up, press home while swiping -> goes home, stops responding to drag
- Start dismissing task and hit home before it finishes (or while dragging)
-> goes home, stops responding to drag
Bug: 78249220
Change-Id: If11d8999e3fadba38c987b25af67cd2304cd859b
As you swipe up to overview from home, workspace scales down and fades out as before,
and now recents scales down from 1.2f on top of it. The interpolators are set such
that the workspace animation is seen before the recents animation. Also, we don't
scale down all of recents, only the visible pages (current and adjacent).
Change-Id: I5f8bfe8cafeaa41d26873c63549735d7bdff2bce
> Instead of views, using a custom class to draw the color scrims
> All-apps has full screen UI
> Quickstep does not have search box in landscape
Bug: 73085356
Change-Id: I360a78a2ade0134daad29fe712796cd39a381fbb
> Hotseat is tied to navbar (on left in seascape)
> Search box shows up in Overview (clicking it would crash for now)
> All-apps is no longer fullscreen in landscape
> Recents cards are appropriately scaled down
> Hotseat is visible in Overview
Bug: 70179916
Change-Id: I53149eaeac9557e8a01021b7e2d139f3d6ceef37
View layer was only being used when fading in/out hotseat in overview.
From API 21+, android automatically create layers when animating alpha
The current support for view layers does not work properly when cancelling
animations and controlling partial animations
Change-Id: I2d5785471af9819575beefe65f1f2bdd28c76bd5
> Using workspace scale and translation for all-apps
> Without quickstep, workspace has the parallex effect as before
> With quickstep, workspace scales down to match the recents card width
> Using a single animator for recents views in case of state transtion and
controlled transition to prevent going into inconsistant state.
Change-Id: I1864de6892052ca771f4d0062e3d60c28840a72d
> Creating ShareHandlers for managing UI
> In normal build, hotseat is hidden in overview, while in QuickStepBuild, it is visible
Change-Id: I5f8d35c75b861d912d93fce186b5dd74106184c3
> Reapplying CellLayout state when new pages are added (page bind comes after restore)
> Removing support for different scroll range for freescroll (the calculations were not
consistant with maxScroll)
Bug: 67678570
Change-Id: Ic1911de1b707f2f6940e7040f07ca7e733e2ef2a
> Removing Widgets and related states
> Fixing different durations being used when opening/closing all-apps
> Removing some unnecessary object allocations when changing state without animation
> Differentiating widget bootm sheel and full sheet in logs
Bug: 67678570
Change-Id: Ic169528736d04ee0b38564b4f96595ba066eabda
The supported way to customize Launcher and add a "-1 page" is by
using LauncherOverlays. Custom content screen is no longer supported.
Change-Id: I3f8a2734c287d1a69ae0c038ec1de1d45fa1b464
* Since adding springs to the apps in All Apps, it is no longer
efficient to build a hardware layer for it.
* Pre-uploads bitmaps to RenderThread.
* Only add overview animations if we are transitioning to/from it.
Bug: 63711551
Change-Id: I948267598e95ec59dc156acb9abe6b5b789110c0
> Removing workspace state change listener. State change happens with hardware layer,
so children should not be calling invalidatge() during the animation
> Moving QSB inside the QSB and removing a floating layout
Bug: 37616877
Change-Id: I9af3522a05dafa5796586bb64f512d98688caf79
